Power Supply - HP EliteOne 705 G2 Maintenance & Service Manual

Power supply

Description
200W for use in models with discrete graphics
160W for use in models with UMA graphics
The power supply is located in the middle of the computer under the VESA mounting plate.
To remove the power supply:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the system board shield (see
6. Remove the VESA mounting bracket (see
7. Disconnect the power supply cable from the system board connector (1).
Preparing to disassemble the computer on page
Rear port cover on page
Attaching and removing a stand on page
Access panel on page
System board (EMI) shield on page
VESA mounting bracket on page
31).
32).
37).
48).
75).
31).
Power supply 77