Processor - Amd Models - HP EliteOne 705 G2 Maintenance & Service Manual

Processor – AMD models
Description
AMD A10-8750B (3.6-GHz) processor
AMD A8-8650B (3.2-GHz) processor
AMD A6-8550B (3.7-GHz) processor
AMD A4-8350B (3.5-GHz) processor
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the system board shield (see
6. Remove the heat sink (see
7. Rotate the locking lever to its full open position (1), and then carefully lift the processor from the socket
(2).
CAUTION:
them could cause irreparable damage. Once pins are damaged it may be necessary to replace the
system board.
NOTE: After installing a new processor onto the system board, always update the system ROM to ensure
that the latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the
Web at: http://www.hp.com.
Rear port cover on page
Attaching and removing a stand on page
Access panel on page
Heat sink on page
Do NOT handle the pins in the processor socket. These pins are very fragile and handling
Preparing to disassemble the computer on page
31).
37).
System board (EMI) shield on page
59).
32).
48).
Processor – AMD models
31).
61