Table of Contents
Advertisement
Opening Your Personal Workstation and Installing Accessories
Removing and Replacing the Left-Side and Front Panels
Bottom Section Removal
The procedure in this section explains how to remove the bottom section
of the front panel. Removing the bottom section of the front panel gives
you access to the Personal Workstation's control module.
1. Remove the left-side panel as explained in the section "Removing the
2. Lift up on both retainer tabs of the bottom section of the front panel.
Figure 2-7
Lifting Up on the Bottom Section's Retainer Tabs
62
Left-Side Panel" in this chapter, and remove the top section of the
front panel as explained in the section "Top Section Removal" in this
chapter.
While holding the tabs, swing this section outward 15 degrees in the
direction of the arrow. See Figure 2-7.
View from
the top
15˚
Retainer Tabs
for the Front
Panel Bottom
Section
Chapter 2
Advertisement
Table of Contents
