Download Print this page
HP EliteOne 800 G3 Disassembly Instructions Manual

HP EliteOne 800 G3 Disassembly Instructions Manual

Touch gpu all-in-one business pc
Hide thumbs Also See for EliteOne 800 G3:

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP EliteOne 800 G3 Touch GPU All-in-One Business PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
MB*1, Memory*2, SSD*1
All types including standard alkaline and lithium coin
or button style batteries RTC
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps LED
Power cord
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
4
1
0
1
0
0
0
1
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP EliteOne 800 G3

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 2. Remove the stand ,push the button on red circle location 3. Remove rear cove ,pull up the rear cover on red circle location then remove rear cover EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 4 4. Remove IO pocket , release 2 screws on red circle location remove IO pocket Tool: Star(Torx) screwdriver OD 3.3mm 5. Remove VESA bracket with Fan , release 5 screws on red circle location to remove VESA bracket with Fan Tool: Star(Torx) screwdriver OD 3.3mm EL-MF877-00 Page 4...
  • Page 5 6. Remove Fan from VESA bracket ,release 4 screws on red circle location remove Fan from VESA bracket Tool: Star(Torx) screwdriver OD 3.3mm 7. Remove thermal module(GPU SKU) , release 8 screws on red circle location to remove thermal module Tool: Star(Torx) screwdriver OD 3.3mm EL-MF877-00 Page 5...
  • Page 6 8. Remove HDD with HDD cage , release 1 screw on red circle location and remove the DC power cable from the hook on red circle location to remove HDD with HDD cage Tool: Star(Torx) screwdriver OD 3.3mm EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 7 9. Remove HDD from cage , slide HDD out from the cage then release 4 gromet to remove HDD from cage Tool: Cross(Philips) screwdriver OD 3.0mm 10. Remove ODD , push the ODD latch on red circle location to slide out the ODD EL-MF877-00 Page 7 Template Revision B...
  • Page 8 11. Remove ODD latch and bazel EL-MF877-00 Page 8 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 9 12. Remove Webcam module box , release 3 screws on red circle to remove Fan dust then release 4 screws on yellow screws and unplug webcam connector on yellow circle location from MB Tool: Star(Torx) screwdriver OD 3.3mm Cross(Philips) screwdriver OD 3.0mm 13.
  • Page 10 Tool:Cross(Philips) screwdriver OD 2.0mm EL-MF877-00 Page 10 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 11 14. Remove WLAN card , release 1 screws on red circle on location and unplug the antenna on yellow circle location to remove WLAN card Tool: Cross(Philips) screwdriver OD 2.0mm 15. Remove SSD card , release 1 screw on red circle location to remove SSD card Tool: Cross(Philips) screwdriver OD 2.0mm EL-MF877-00 Page 11...
  • Page 12 16. Remove Power supply , release 3 screws on red circle location then unplug connector on yellow circle location to remove Power supply Tool: Star(Torx) screwdriver OD 3.3mm EL-MF877-00 Page 12 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 13 17. Remove Audio jack cable , release 1 screw on red circle location and unplug connector from MB on yellow circle location to remove Audio jack cable Tool: Star(Torx) screwdriver OD 3.3mm EL-MF877-00 Page 13 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 14 18. Remove IO shielding , release 5 screws to remove IO shielding Tool: Star(Torx) screwdriver OD 3.3mm EL-MF877-00 Page 14 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 15 19. Remove Power button board with bracket, release 1 screw on red circle location and unplug connector on yellow circle location from MB Tool: Star(Torx) screwdriver OD 3.3mm EL-MF877-00 Page 15 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 16 20. Remove Power button board from bracket , release 2 screws on red circle location to remove Power buton board from bracket Tool: Cross(Philips) screwdriver OD 2.0mm EL-MF877-00 Page 16 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 17 21. Remove Finger print module (Touch SKU) , release 2 screws on red circle loction to remove Finger print module Tool: Cross(Philips) screwdriver OD 2.0mm 22. Remove MB , remove LVDS on red circle location from MB then release 9 screws on yellow circle location to remove MB Tool: Star(Torx) screwdriver OD 3.3mm EL-MF877-00 Page 17...
  • Page 18 23. Remove CPU ,push down the latch on red circle location to remove CPU EL-MF877-00 Page 18 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 19 24. Remove Memory , push latch on red circle location to remove Memoy 25. Remove Thermal pad , remove Thermal pad on red circle location EL-MF877-00 Page 19 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 20 26. Remove Base pan , release 12 screws on red circle location to remove Base pan from Middle frame Tool: Cross(Philips) screwdriver OD 3.0mm EL-MF877-00 Page 20 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 21 27. Remove Speaker , release 4 screws on red circle location to remove Speaker Tool: Star(Torx) screwdriver OD 3.3mm EL-MF877-00 Page 21 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 22 28. Remove L+R Antenna ,tear the Antenna(L+R) on red circle location to remove Antenna(L+R) EL-MF877-00 Page 22 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 23 29. Remove LVDS , Backlight cable (Non-tTouch SKU) , remove LVDS , Backlight cable on red circle location to remove cables from LCD 30. Remove LCD from Middle frame , rotate the Middle Frame as the picture to remove LCD from Middle Frame EL-MF877-00 Page 23 Template Revision B...
  • Page 24 EL-MF877-00 Page 24 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 25 EL-MF877-00 Page 25 Template Revision B PSG instructions for this template are available at EL-MF877-01...