Pci-Express M.2 Solid-State Drive - HP EliteOne 705 G2 Maintenance & Service Manual

PCI-Express M.2 Solid-State Drive

Description
256-GB solid-state drive, 2280SS, PCIe, NVMe
128-GB solid-state drive, 2280SS, PCIe, NVMe
The optional PCI-Express M.2 SSD is located near the bottom of the system board. The drive is secured with
one Phillips screw.
To remove the PCI-Express M.2 SSD:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the system board shield (see
6. Remove the Phillips screw (1) that secures the SSD to the computer.
54 Chapter 4 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Rear port cover on page
Attaching and removing a stand on page
Access panel on page
System board (EMI) shield on page
31).
32).
37).
48).
31).