Typical Drying Times - Oce TCS500 User Manual

Typical drying times

Typical drying times
Introduction
The printer automatically adapts the default drying time. The default drying time
depends on the following.
The media type
The ambient humidity
The print mode.
When you print greyscale in the 'Check' quality mode, the system decreases the
drying time to 20% of the default value.
You can change the drying time for all the media types. You can select a percentage
of 0% - 999% of the default drying time
page 153).
Typical drying times per media type
The following table describes typical drying times for Océ media under standard
conditions (22 °C, 50% relative humidity).
[100]
[100] Typical drying times per media type
Media type
Draft paper
Standard paper
Bond
Deluxe bond
Premium coated paper
Coated bond
Matt photo paper
High gloss photo paper
Tracing paper
Translucent bond
Monochrome vellum
284 Appendix A Specifications of the Océ TCS500
(see 'Change the default drying time' on
Media name
Océ Draft Paper 80 g/m
Océ Standard Paper 90 g/m
Océ Check Bond uncoated 20 lbs
Océ Deluxe Bond uncoated 24 lbs
Océ Premium Grade Paper 90 g/m
Océ Color Bond coated 24 lbs
Océ Smart Matt Paper 100 (170) g/m
Océ Smartfit Plus Photogloss 175
2
g/m
Océ Tracing Paper 90 g/m
Océ Translucent Bond 16 lbs
Océ Translucent Bond 18 lbs
Océ Monochrome Vellum 16 lbs
Océ Monochrome Vellum 20 lbs
(1 – 2)
Drying time
(minutes'sec
onds")
2
0'15"
2
0'20"
0'20"
0'20"
2
0'20"
0'20"
2
0'50"
4'45"
2
2'55"
0'50"
1'05"