Introduction To Copy Jobs - Oce TCS500 User Manual

Introduction to copy jobs

Introduction to copy jobs
Introduction
A basic copy job takes two steps. Feed the original and press the start key. Every
other type of copy job is called an extended copy job. An extended copy job takes
one additional step, define the copy job settings at the scanner operator panel. When
you turn the Océ TCS500 on or when you select 'Copy', the scanner operator panel
shows five copy job templates. The copy job templates provide access to the different
settings per copy job template. When you select a copy job template, the scanner
operator panel shows the top 5 settings of the selected copy job template. The top 5
settings are the most often used settings. You can define the top 5 settings for each
copy job template with the Océ Settings Editor. You can use the scroll wheel to see
the other settings. After you start a copy job, you can manage your jobs from the Océ
Queue Manager.
Illustration
[127]
[127] The copy job templates
Steps in a basic copy job
Feed the original.
1.
Press the green start key.
2.
160 Chapter 7 Use the Océ TCS500 for copy jobs