Replace The Ink Tanks - Oce TCS500 User Manual

Replace the ink tanks

Replace the ink tanks
Introduction
The Océ TCS500 contains the following four ink tanks.
One tank for the cyan ink.
One tank for the magenta ink.
One tank for the yellow ink.
One tank for the black ink.
The ink level card on the printer operator panel indicates the ink level of each colour
as a percentage.
You can replace the ink tanks at any time. A wizard is not required.
When to do
You must replace an ink tank when the ink level indicator on the printer operator
panel shows 0%. The indicator flashes when the ink tank is empty.
Note: While you replace the ink tank, the printer can continue to print on the ink
present in an intermediate ink storage tank inside the printer.
Note: If you do not replace the ink tank in time a pop-up message appears on the
screen. The pop-up message displays the message 'Out of [colour] ink. Replace ink
tank'. The system produces a double audio signal and the red LEDs of the printer
operator panel remain illuminated. The printer stops and immediate action is
required.
246 Chapter 11 Maintain the Océ TCS500