Select The Required Media - Oce TDS700 User Manual

Select the required media

Select the required media
Introduction
The 'Media' setting can be used to select the output material and format. The printer
operator panel will show you what rolls or sheet feeders are currently loaded. The
currently selected roll or sheet feeder is indicated with a bullit symbol.
If you select 'Automatic', the Océ TDS700 will try to use a roll or sheet feeder
format that matches the original size. After inserting the original, the roll or sheet
feeder that is used is indicated by the bullet symbol. The bullet symbol remains in
place until a new original is inserted. Then it may move to indicate another roll or
sheet feeder, depending on the original format.
First select the 'media sizes', then select one of the sizes. The scale factor is based on
the selected media size.
Note: You can also select the desired media from the 'Custom' section, if this setting
is defined for the 'Custom' section in the Océ TDS700 Power Logic
application.
Illustration
[109]
[109] Select the required Media sizes
Select the media sizes
Select the 'Sheet' card in the 'Original' section
1.
Select the required paper series with the 'Media sizes' function key.
2.
182 Chapter 4 Use the Océ TDS700 productive scanner
®
controller