Subaru 2002 IMPREZA Service Manual page 91

m
DRAIN VALVE
EMISSION CONTROL
(AUX.
EMISSION CONTROL DEVICES)
15.Drain Valve
A: REMOVAL
1) Disconnect the ground terminal from battery.
6) Remove the bolt which installs the drain filter and
drain valve brackets on body, and remove them as
a unit.
2) Lift-up the vehicle.
3) Remove the canister. <Ref. to EC(D0HC TUR-
BO)-6, REMOVAL, Canister.>
4) Disconnect the connector from drain valve.
B:
7) Remove the drain valve from bracket.
/
0
0 -
H2M3611
5) Disconnect the evaporation hoses from drain
valve.
-------
H2M3612AI
INSTALLATION
Install in the reverse order of removal.
Tightening torque:
23 N-m ( 2 . 3
kgf-m, 17 ft-16)
EN1055
EN1055
C: INSPECTION
1) Make sure all hoses are installed correctly.
2) Make sure the hoses are not cracked or loose.
EC(D0HC TURBO)-17