Subaru 2002 IMPREZA Service Manual page 58

I
FUEL FILLER PIPE
FUEL INJECTION (FUEL SYSTEMS)
12) Disconnect the evaporation hoses from the
pipes.
17) Remove the air vent pipe together with clip from
the body.
13) Remove the bolts which hold fuel filler pipe
bracket on the body.
I
EN1124
14) Loosen the clamp and separate the fuel filler
hose (A) from fuel filler pipe.
15) Move the clip and separate the evaporation
hose (B).
16) Remove the fuel filler pipe to under side of the
vehicle.
B:
1) t
I N STA LLATlO N
Ad the fuel filler flap open.
2) Set the fuel saucer (A) -with rubber packing (C)
and insert the fuel filler pipe into the hole from the
inner side of apron.
3) Align the holes in fuel filler pipe neck and set the
cup (B), and tighten the screws.
NOTE:
If edges of rubber packing are folded toward the in-
side, straighten it with a screwdriver.
FU(D0HC TURBO)-56