Subaru 2002 IMPREZA Service Manual page 185

a
MECHANICAL
CYLINDER BLOCK
(1) Piston
(2) Piston pin
(3) Circlip
(5) Service hole plug
Tightening torque: N.m (kgf-m, ft-lb)
(6) Service hole cover
T1: 6.4 (0.65, 4.7)
(7) O-ring
T2: 69 (7.0, 50.6)
(4)
Gasket
(6) Turn the cylinder block so that
#3 and #4 cyl-
inders face upward. Using the same procedures
as used for #1 and #2 cylinders, install the pis-
tons and piston pins.
15) Install the water pipe.
16) Install the baffle plate.
Tightening torque:
6.4 N.m (0.65 kgf-m, 4.7 ff-lb)
17) Install the oil strainer and O-ring
Tightening torque:
10 N-m (1.0 kgf-m, 7 ff-lb)
18) Install the oil strainer stay.
19) Apply fluid packing to matching surfaces
install the oil pan.
Fluid packing:
THREE BOND 1215 or equivalent
S2M 1833A
and
ME( DOHC TURBO)-79