Subaru 2002 IMPREZA Service Manual page 151

V-BELT
MECHANICAL
2. REAR SIDE BELT
C: INSPECTION
1) Install a belt, and tighten the slider bolt (B) so as
to obtain the specified belt tension. <Ref. to
ME(D0HC TURBO)-45, INSPECTION, V-belt.>
1) Replace the belts, if cracks, fraying O r Wear is
found.
2) Check the drive belt tension and adjust it if nec-
2) Tighten the lock nut (A).
Tightening torque:
Lock nut (A);
22.6 Nom (2.3 kgf-m, 16.6 ff-lb)
6
essary by changing generator installing position
and/or idler pulley installing position.
Belt tension
(A)
(B)
*
replaced: 7
-
9 mm (0.276
-
0.354 in)
reused: 9
-
11 mm (0.354
-
0.433 in)
replaced: 7.5
-
8.5 mm (0.295
-
0.335 in)
reused: 9.0
-
10.0 mm (0.354
-
0.394 in)
* :
With Air conditioner
I
98
N (10 kgf, 22 Ib)
C/P Crankshaft pulley
P/S
Power steering oil pump pulley
N C Air conditioning compressor pulley
I/P Idler pulley
GEN Generator
ME(D0HC TURBO)-&