CANISTER
EMISSION CONTROL
(AUX.
EMISSION CONTROL DEVICES)
5. Canister
C: INSPECTION
A: REMOVAL
cracked or loose.
1) Lift-up the vehicle.
2) Loosen the two clamps which hold two canister
hoses, and disconnect the evaporation three hoses
Make sure the canister and canister hoses are not
from canister
\
I I
/
S2M0950
3) Remove the canister from body.
B: INSTALLATION
1) Install in the reverse order of removal.
Tightening torque:
23 N.m (2.3 kgf-m, 17 ff-lb)
EC(D0HC TURBO)-6