Idle Air Control Solenoid Valve - Subaru 2002 IMPREZA Service Manual

IDLE AIR CONTROL SOLENOID VALVE
FUEL INJECTION (FUEL SYSTEMS)
11 .Idle Air Control Solenoid
Valve
A: REMOVAL
1) Disconnect the battery ground cable.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Always use a new gasket.
Tightening torque:
2.8 N-m (0.29 kgf-m, 2.1 fWb)
2) Disconnect the connector from the idle air con-
trol solenoid valve.
I
EN0822
3) Remove the idle air control solenoid valve from
the throttle body.
I
4) Remove the gasket from throttle body.
FU( DOHC TU RB0)-36