Subaru 2002 IMPREZA Service Manual page 211

m
EXHAUST
CENTER EXHAUST PIPE
15) Separate the center exhaust pipe from rear ex-
haust pipe.
' I
\ I
G2M085E
16) Remove the bolt which holds center exhaust
pipe bracket to transmission.
17) Remove the intercooler bracket.
18) Remove the bolt which holds center exhaust
pipe to hanger bracket.
CAUTION:
Be careful not to pull down the center exhaust
pipe.
19) Remove the center exhaust pipe.
B: INSTALLATION
CAUTION:
Replace the gaskets with new ones.
1) Install the center exhaust pipe and temporarily
tighten the bolt which holds center exhaust pipe to
hanger bracket.
2) Temporarily tighten the bolt which holds the cen-
ter pipe to transmission.
3) Connect the center exhaust pipe to turbocharg-
er.
Tightening torque:
35 N-m (3.6 kgf-m, 26.0 ft-lb)
4) Install the center exhaust pipe to rear exhaust
pipe.
Tightening torque:
18 N-m (1.8 kgf-m, 13.0 ft-lb)
I ' I
G2M0855
I
5 ) Connect the connector to rear oxygen sensor.
EX(D0HC TURBO)-9