Subaru 2002 IMPREZA Service Manual page 105

INTAKE (INDUCTION)
TURBOCHARGER
B: INSTALLATION
1) Connect the oil outlet hose to outlet pipe.
2) Install the turbocharger to air intake duct.
3) Install the oil pipe to turbocharger
/
I I
/ENOW:
4) Install the joint pipe to turbocharger.
NOTE:
Replace the gasket with a new one.
Tightening torque:
30 N.m (3.1 kgf-m, 22.4 ft-lb)
I
EN0911
5 ) Install the turbocharger bracket.
6) Connect the engine coolant hose which is con-
nected to coolant filler tank.
I
.
7) Lift-up the vehicle.
8) Install the center exhaust pipe. <Ref. to
EX(D0HC TURBO)-9, INSTALLATION, Center
Exhaust Pipe.>
IN(D0HC TURBO)-I 3