Subaru 2002 IMPREZA Service Manual page 167

CAMSHAFT
MECHANICAL
3) Camshaft oil seal installation:
Apply grease to the new oil seal lips and press onto
the front end of camshaft by using ST1 and ST2.
CAUTION:
Use a new oil seal.
ST1 499587600 OIL SEAL INSTALLER
ST2 499597200 OIL SEAL GUIDE
4) Rocker cover installation:
(1) Install the gasket on rocker cover.
Install the peripheral gasket and ignition coil
gasket.
(2) Apply fluid packing to four front open edges
of peripheral gasket.
THREE BOND 1215 or equivalent
Fluid packing:
(3) Install the rocker cover on cylinder head.
Ensure the gasket is properly positioned during
installation.
5) Install the spark plug cord.
6) Similarly, install the parts on right-hand side.
7) Install the right-hand belt cover No. 2.
Tightening torque:
5 N-m (0.5 kgf-m, 3.6 ft-lb)
8) Install the tensioner bracket.
Tightening torque:
25 N-m (2.5 kgf-m, 18.1 fWb)
9) Install the left-hand belt cover No. 2.
Tightening torque:
5 N.m (0.5 kgf-m, 3.6 ft-lb)
S2M1162
10) Install the crankshaft sprocket. <Ref. to
ME(D0HC TURBO)-58, INSTALLATION, Crank-
shaft Sprocket.>
11) Install the camshaft sprockets. <Ref. to
ME(D0HC TURBO)-57, INSTALLATION, Cam-
shaft Sprocket.>
12) Install the timing belt assembly. <Ref. to
ME(D0HC TURBO)-50, INSTALLATION, Timing
Belt Assembly.>
13) Install the belt cover. <Ref. to ME(D0HC TUR-
BO)-47, INSTALLATION, Belt Cover.>
ME(D0HC TURBO)-61