Subaru 2002 IMPREZA Service Manual page 183

MECHANICAL
CYLINDER BLOCK
11) Position the lower rail gap at (E) or
(F)
in the fig-
ure.
CAUTION:
Ensure ring gaps do not face the same direc-
tion.
Ensure ring gaps are not within the piston
skirt area.
EN0305
12) Installing the circlip:
Install the circlips in piston holes located opposite
of the service holes in cylinder block, when posi-
tioning all pistons in the corresponding cylinders.
CAUTION:
Use new circlips.
B2M1403A
Front side #2
CAUTION:
Piston front mark faces towards the front of the
engine.
(A) Front mark
(1) Piston
(2) Piston pin
(3) Circlip
(4) Gasket
(5) Service hole plug
Tightening torque: N.m (kgf-m, ft-lb)
T:
69 (7.0, 50.6)
ME(D0HC TURBO)-77