Subaru 2002 IMPREZA Service Manual page 141

ENGINE ASSEMBLY
MECHANICAL
(3) Remove the pipe with bracket from intake
manifold.
(4) Remove the power steering pump from en-
gine.
(5) Remove the power steering tank from the
bracket by pulling it upward.
I
I
(6) Place the power steering pump on the right
side wheel apron.
14) Remove the center exhaust pipe. <Ref. to
EX(D0HC TURBO)-8, REMOVAL, Center Exhaust
Pipe.>
15) Remove the nuts which hold lower side of
transmission to engine.
16) Remove the nuts which install the front cushion
rubber onto front crossmember.
17)
I
SeDarate the clutch release fork from release
bearing. (MT vehicles)
(1) Remove the clutch operating cylinder from
transmission.
(2) Remove the plug using a 10 mm hexagon
wrench.
I
S2M193:
ME(D0HC TURBO)-35