Subaru 2002 IMPREZA Service Manual page 161

TIMING BELT ASSEMBLY
m
MECHANICAL
7) Install the belt cover. <Ref. to ME(D0HC TUR-
BO)-47, INSTALLATION, Belt Cover.>
8) Install the crankshaft pulley. <Ref. to ME(D0HC
TURBO)-46, REMOVAL, Crankshaft Pulley.>
9) Install the V-belt. <Ref. to ME(D0HC TURBO)-
44, INSTALLATION, V-belt.>
C: INSPECTION
1.
TIMING
BELT
1) Check the timing belt teeth for breaks, cracks,
and wear. If any fault is found, replace the belt.
2) Check the condition of back side of belt; if any
crack is found, replace the belt.
CAUTION:
Be careful not to let oil, grease or coolant
contact the belt. Remove quickly and thorough-
ly if this happens.
Do not bend the belt sharply.
Bending radius: h
60 mm (2.36 in) or more
G2M0115
ME(D0HC TURBO)-55