Subaru 2002 IMPREZA Service Manual page 85

FUEL TANK PRESSURE SENSOR
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
10.Fuel Tank Pressure Sensor
A: REMOVAL
1) Remove the fuel tank. <Ref. to FU(D0HC TUR-
BO)-52, REMOVAL, Fuel Tank.>
2) Remove the protector cover.
EN1 0%
3) Disconnect the connector from fuel pressure
sensor, then remove the fixing nut.
4) Release the clips which hold fuel pipes onto fuel
tank.
I
Clip EN1 052
I
5) Remove the clip, and disconnect pressure hose
from fuel tank.
6) Disconnect the pressure hose from fuel tank
pressure sensor.
G 3
B2M 1779
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.4 N-m (0.75 kgf-m, 5.4 ft-lb)
C: INSPECTION
Make sure the hoses are not cracked or loose.
EC(D0HC TURBO)-I 1