FUEL FILTER
FUEL INJECTION (FUEL SYSTEMS)
28. Fuel Filter
A: REMOVAL
WARNING:
Place "NO FIRE" signs near the working area.
Be careful not to spill fuel on the floor.
1) Release the fuel pressure. <Ref. to FU(D0HC
OPERATION, Fuel.>
2) Disconnect the fuel delivery hoses from the fuel
filter.
TURBO)-51, RELEASING OF FUEL PRESSURE,
3) Remove the filter from the holder.
B: INSTALLATION
CAUTION:
If fuel hoses are damaged at the connecting
portion, replace it with a new one.
If clamps are badly damaged, replace with
new ones.
1) Install in the reverse order of removal.
2) Tighten the hose clamp screws.
Tightening torque:
1.25 Nom (0.13 kgf-m, 0.94 ft-lb)
17
C: INSPECTION
1) Check the inside of fuel filter for dirt and water
sediment.
2) If it is clogged, or if replacement interval has
been reached, replace it.
3) If water is found in it, shake and expel the water
from the inlet port.
FU(D0HC TURBO)-65