INTAKE MANIFOLD
FUEL
INJECTION (FUEL SYSTEMS)
10) Tighten the two bolts which install the fuel pipes
on the left side of intake manifold.
Tightening torque:
4.9 N-m (0.5 kgf-m, 3.6 ff-lb)
11) Connect the evaporation hoses to the purge
valve.
CAUTION:
Carefully connect the evaporation hoses.
(D)---
lJ
EN081 6
12) Connect the evaporation hose to the intake
manifold.
EN080:
13) Install the purge control solenoid valve.
Tightening torque:
16 N-m (1.6 kgf-m, 11.8 ff-lb)
14) Connect the hoses to the purge control sole-
noid valve.
CAUTION:
Carefully connect the evaporation hoses.
(A) To fuel pipe ASSY
(B) To intake duct
(C) To purge control solenoid valve
(D) To intake manifold
(A) To intake manifold
(B) To purge valve
FU(D0HC TURBO)-26