Replacing A 3.5-Inch Hdd; Preliminary Steps; Removing The Defective 3.5-Inch Hdd; Installing The New 3.5-Inch Hdd - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

Hard disk drives (HDDs)
7.4

Replacing a 3.5-inch HDD

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
All HDDs must be uniquely identified so that they can be reinstalled in
their original mounting locations later. If this is not done, existing data can
be lost.
7.4.1

Preliminary steps

"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
"Getting access to the component" on page 46
Ê
7.4.2

Removing the defective 3.5-inch HDD

Ê Remove the HDD, see section
7.4.3

Installing the new 3.5-inch HDD

Ê Install the HDD, see
92
"Removing a 3.5-inch HDD" on page
section"Installing a 3.5-inch HDD" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
90.
86.
TX1310 M3