Canon Laser Class 810 Basic Operation Manual page 369

SYSTEM SETTINGS
3. SET IP ADD RANGE
OFF
ON
4. DNS SETTINGS
1. DNS SERVER SET Regsters the DNS server address.
1. PRIM. DNS
SERVER
2. SECOND
DNS SERVER
2. HOST/DOMAIN
NAME
1. HOST NAME
2. DOMAIN
NAME
3. DNS DYNAMIC
SET
1. DNS DYNA.
UPDATE
2. IPv6 SETTINGS
1. USE IPv6
OFF
ON
Sets whether to restrct the range of IP addresses.
Dsables restrcton of IP address of computers.
Enables you to set whch IP addresses can send data (prnt/fax
jobs) to the machne. You can select to permt or reject up to
eght ranges of IP addresses. Set each range of IP addresses by
enterng an IP address n both <START IP ADDRESS> and <END
IP ADDRESS>.
– 1. IP ADDRESS 1
– 2. IP ADDRESS 2
– 3. IP ADDRESS 3
– 4. IP ADDRESS 4
– 5. IP ADDRESS 5
– 6. IP ADDRESS 6
– 7. IP ADDRESS 7
– 8. IP ADDRESS 8
– 9. IP ADDRESS 9
– 10. IP ADDRESS 10
Sets the DNS server settngs.
Regsters the prmary server address.
Regsters the secondary server address.
Regsters the host name and doman name of the DNS server.
Regsters the host name of the DNS server.
Regsters the doman name of the DNS server.
Sets whether to use the DNS server dynamc update settng.
Sets whether to use the DNS server dynamc update functon.
– OFF
– ON
Sets IPv6 Address settngs. (See "Set the Machne for Network
Usage," n the Starter Gude.)
Sets whether to use IPv6 networks.
Only IPv4 s used.
Both IPv4 and IPv6 are used. A lnk local address s also
automatcally set.
12-39