Canon Laser Class 810 Basic Operation Manual page 344

TX/RX SETTINGS
2. RX SETTINGS
1. SELECT CASSETTE
SWITCH A
SWITCH B
2. TWO-SIDED PRINT
3. RECEIVE REDUCTION
ON
1. RX
REDUCTION
2. REDUCE
DIRECTION
OFF
4. RX PAGE FOOTER
5. CONT. PRINTING
RX TO MEMORY
KEEP PRINTING
12-14
Sets the recepton features.
You can set how the machne prnts documents when there s
no paper matchng the sze of the receved document.
The mage s prnted over two sheets of paper that have the
same combned sze as the receved document.
– ON
– OFF
The mage s prnted wth blank space on paper that has the
same wdth as the receved document.
– ON
– OFF
Sets whether the machne prnts receved documents on both
sdes of the paper. (See Reference Gude > Send/Receve.)
– OFF
– ON
Sets whether the receved mages prnt out at a reduced sze.
(See Reference Gude > Send/Receve.)
Image reducton s turned on.
Selects the reducng type.
– AUTO
– FIXED REDUCTION (90%, 95%, 97%, 75%)
Selects the reducng drecton.
– VERTICAL ONLY
– HORIZ & VERTICAL
Image reducton s turned off.
Sets whether to nsert the machne's fax number and the sender
nformaton on receved faxes.
– OFF
– ON
Selects how the machne responds when the <TONER LOW/
PREPARE NEW TONER> message appears.
The machne stores all documents n memory.
The machne does not store documents n memory f the toner
runs out. Reset to <RX TO MEMORY> after replacng the toner
cartrdge.