Fuji Xerox ApeosPort-3 C4400 User Manual page 51

No. Component
3 <All Services> button
4 <Energy Saver> button
5 <Clear All> button
6 <Interrupt> button
7 <Stop> button
8 <Start> button
9 Numeric keypad
10 <Speed Dial> button
11 <C (Clear)> button
12 <Dial Pause> button
13 <Log In/Out> button
14 <Machine Status> button
15 <Review> button
16 <Job Status> button
17 Brightness dial
18 <Job in Memory> indicator
19 <Online> indicator
Press this button to display the [All Services] screen.
You can change the features that appear on the [All Services] screen. For information,
refer to "1 Before Using the Machine" > "Customizing the Control Panel" >
"Customizing the [All Services] Screen" in the Administrator Guide.
If the machine is not operated for a while, the machine's power
consumption is lowered to enter the Energy Saver mode. In the Energy
Saver mode, this button lights up. To enter the Energy Saver mode,
press this button. To cancel the Energy Saver mode, press this button
again.
Returns the settings you made to the default values. The machine
returns to the same state as when it is powered on.
Press this button to suspend a copy or print job in progress to have the
machine process another job. During the Interrupt mode, the <Interrupt>
button lights up. Pressing the <Interrupt> button again exits the Interrupt
mode and resumes the suspended job.
Press this button to stop the current copy job or communications.
Press this button to start scanning a document.
Use the numeric buttons on the keypad to enter the number of copies,
passwords and other numerical values.
Press this button to specify a recipient with an address number when
sending a fax or e-mail.
Press this button if you have entered a wrong numerical value with the
numeric keypad.
Used to insert a pause into a destination number.
Press this button to display the User ID entry screen for logging into the
System Administration mode, Authentication mode, or Account
Administration mode. Press this button to log out as well.
Press this button to check the machine status and meters, to check the
status of consumables, and to print reports.
Press this button to open the [Review] screen. In this screen, you can
check a list of the status of copy and scan features whose settings have
changed from the defaults. You can also check the details of fax and e-
mail recipients.
Press this button to check or cancel the current job, to check or print
saved documents, or to check completed jobs.
Adjusts the brightness of the touch screen. Use this dial to enhance or
decrease the contrast.
Lights when data is stored in the machine's memory.
Lights when the machine is sending or receiving data to or from a client.
Function
Control Panel
2
49