Multiple-Up (Copying Multiple Pages Onto One Sheet) - Fuji Xerox ApeosPort-3 C4400 User Manual

3 Copy

Multiple-Up (Copying Multiple Pages onto One Sheet)

2, 4, or 8 pages of a document can be copied together onto a single sheet of paper.
When you select [Multiple-Up], [Auto %] of [Reduce/Enlarge] is selected automatically.
The machine automatically sets the copy ratio and makes copies of the images so that
they fit on the selected paper.
Important • Ensure that the orientation of the document and the [Original Orientation] setting of the
Note
1
Select [Multiple-Up].
3
2
Select any item.
Off
Disables this feature.
2 Pages Up
Copies two document pages onto one side of a single sheet of paper.
4 Pages Up
Copies four document pages onto one side of a single sheet of paper.
8 Pages Up
Copies eight document pages onto one side of a single sheet of paper.
Reading Order
Allows you to select how to lay out images on a page.
Original Orientation
Allows you to specify the orientation of the document to have the machine identify the
top of the document.
Note
Upright Images
Select this item when placing the top edge of the document against the top side of
the document glass or document feeder.
Sideways Images
Select this item when placing the top edge of the document against the left side of
the document glass or document feeder.
98
[Layout Adjustment] screen are the same.
• When [Auto %] of [Reduce/Enlarge] is cancelled (a new copy ratio is selected), image loss
may occur depending on the size of the document image.
• When Image Shift is set, shift is executed on the whole document. For this reason, image
loss at the edge of the original may occur depending on the size of the document image.
• When Edge Erase is set, it is carried out for each document page.
• Select other than [Auto] for a tray to be selected for [Paper Supply] on the [Copy] screen. If
[Auto] is set for [Paper Supply], a tray specified in [Auto Paper Off] is automatically selected.
Change the setting as necessary. For information, refer to "5 Tools" > "Copy Service
Settings" > "Copy Control" > "Auto Paper Off" in the Administrator Guide.
• If the [Original Orientation] differs from the actual document orientation, then the machine
may mistakenly detect the top of the document.