Printing Documents In A Mailbox - Fuji Xerox ApeosPort-3 C4400 User Manual

6 Send from Mailbox

Printing Documents in a Mailbox

You can print selected documents in a mailbox.
1
On the [Document List] screen, select
documents.
2
Select [Print] or [Batch Print].
Enter the number of print sets using the
numeric keypad, if necessary.
Note
3
Select any item.
4
Click [Print].
6
Note
Print
Configure the Print settings.
Paper Supply
Allows you to select paper.
2 Sided Printing
Allows you to set 2-sided printing.
Output
Allows you to set stapling, punching, and a tray where the output is delivered.
Note
For examples of the settings of stapling and hole punching, refer to "When stapling/punching holes"
(P.247).
Document Details
Displays the [Document Details] screen. Select a document from the list to check its
preview image.
For details on previewing a document, refer to "Checking Document Details" (P.245).
Note
246
• When multiple documents are selected,
[Batch Print] treats the selected
documents as one single document, while
[Print] deals them as separate
documents.
• When a document stored by [Save to Mailbox] of a print driver is printed, the settings
specified on the control panel or CentreWare Internet Services will override the settings
specified on the print driver except the [Multiple-Up], [Skip Blank Page], and print position
settings.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Some models require an optional package to use this feature. For more information, contact
our Customer Support Center.