Accent Light Bulb Replacement - Regency Bellavista B41XTCE-NG10 Owners & Installation Manual

B41XT

ACCENT LIGHT BULB REPLACEMENT

1) Shut off electrical and gas supply.
2) Remove the glass door - see instructions in manual.
3) Remove the logs, lava rock and vermiculite if installed.
4) Remove the brick or inner panels if installed - see instructions in manual.
5) Remove the burner and rear log tray - see below.
Diagram 1: Remove the left and right screws.
6) Slide the burner assembly to the right to release it from the orifi ce,
then lift it out.
Diagram 2: Slide burner assembly to the right
and then remove.
7) Remove the 2 screws securing the rear log tray and lift out. Diagram 3
Diagram 3
918-864a
BULB REPLACEMENT
8) Remove the 2 screws securing the base tray - lift base tray up and
out. Diagram 4a and 4b.
9) Replace the bulbs as necessary.
Note: Oils from hands will shorten the life of the bulbs,
do not handle bulbs with bare hands.
10) Reverse steps 9 - 1.
4
maintenance
Diagram 4a
Diagram 4b Base Tray
Regency Bellavista™ B41XTCE-10 Gas Fireplace
|
57
| 57
08/12/14