Regency Bellavista B41XTCE-NG10 Owners & Installation Manual page 40

B41XT
installation
|
40
5) Place Log I on the left side of the burner, directly in front of Log A.
Position Log I so it fi ts into the pin on the burner as shown below.
I
6) When Log F and I are in position - make sure they positioned all the
way back and touch the tabs on the burner as shown below.
I
Diagram 5– location of back
tabs on Burner
7) Place Log H on the left front side of the burner in front of log I.
Position Log H so it fi ts into the pin on the burner as shown below.
H
40 |
Regency Bellavista™ B41XTCE-10 Gas Fireplace
918-863
Diagram 4–Log I
F
Diagram 6–Log G
8) Slide the left side of Log H back until it touches the tab on the burner
shown below.
Tab on Burner
Back of Log H
9) Place Log G on the right front side of the burner in front of log F.
Position Log H so it fi ts into the pin on the burner as shown below.
There is a notch on the bottom of log G - position the log so the notch
fi ts over the 5th burner grate tab as shown below.
G
10) Slide the right side of Log G back until it touches the tab on the burner
shown below.
Tab on Burner
2
Diagram 7–Back of Log G
Notch - Log G Burner Grate Tab
Diagram 8
G
Back of Log G
Diagram 9
05/29/15