Regency Bellavista B41XTCE-NG10 Owners & Installation Manual page 50

B41XT
installation
|
50
12) Install each light assembly from the underside of the fl oor of the
fi rebox. Secure with 2 screws as shown below.
NOTE: The ground wire will need to be pulled back out of the protective
casing to be able to reach the ground lug. Gently pull the end
of the green wire backwards exposing enough wire to reach
ground lug.
13) Install a bulb into each light assembly.
Note: Oils from hands will shorten the life of the bulbs,
do not handle bulbs with bare hands.
50 |
Regency Bellavista™ B41XTCE-10 Gas Fireplace
918-864a
14) Install two light diffusers on to the base tray.
15) Secure diffusers onto base tray from the backside of the tray
with 2 screws.
16) Reinstall base tray with light diffusers - use caution when installing
do not damage the bulb.
17) Install amber glass on to light diffusers.
Note: Glass is longer than diffuser for ease of removal.
18) Reverse steps 9 - 1.
2
08/12/14