Regency Bellavista B41XTCE-NG10 Owners & Installation Manual page 42

B41XT
installation
|
42
16) Place the lava rocks on the burner in front of the logs as shown below.
Be careful not to overlap the lava rock and ensure the burner ports
are left exposed in front of Logs G and H as shown below.
Note: Extra lava rocks can be placed on the vermiculite on the fl oor
of the fi rebox - see below.
42 |
Regency Bellavista™ B41XTCE-10 Gas Fireplace
918-863
Diagram 16
IMPORTANT:
Do not cover burner ports
with lava rocks as this will
change the fl ame pattern.
Diagram 17– Extra Lava Rocks
17) Separate platinum embers and place on the front burner on and
around the lava rocks. Avoid stacking platinum embers.
Platinum embers may be placed over burner ports.
Diagram 18– Platinum Embers
18) Place Log D on the base of the fi rebox in between burner grate posts
3 and 4.
Burner Grate Post 3
Diagram 19
19) Test fi re to ensure proper lighting (make sure fl ame fl ows
smoothly from one end of the burner to the other).
If there is any fl ame hesitation, check that area for any blockage of
the burner ports.
4
D
Burner Grate Post 4
05/29/15