SmartStor NS4300N Product Manual
Setting up a Network Drive on a Macintosh PC
Before you can access the SmartStor from a Macintosh (MacOS X) PC, you must
configure the SmartStor to communicate with the MacOS.
On the Windows PC
1.
Start PASM.
See "PASM in your Browser" on page 18 or "PASM in SmartSYNC" on
page 19.
2.
In the Tree, click the + beside the File & Print icon to expand the Tree, then
click the Protocol Control icon.
3.
Next to Macintosh, click the Enable button.
4.
Click the OK button in the confirmation box.
5.
Click the File Sharing icon in the Tree.
6.
Click the Modify tab.
7.
Check the Macintosh box, then click the OK button.
28