Setting Up A Ups - Promise Technology SmartStor NS4300N Product Manual

Setting up a UPS

This feature enables you to tell the SmartStor how long to run on UPS battery
power and when to shutdown, after a power failure.
To set up a UPS:
1. Attach the APC UPS to one of the SmartStor's USB ports.
2. In the Tree, click the + beside the Management icon.
3. Click the APC UPS icon.
4. Click the Setup tab.
5. Click the option button beside the shutdown option you want:
• Disable – Run until the UPS battery is depleted
• Run until the UPS battery reaches a certain percentage
• Run on the UPS battery for certain period of time
If you chose battery percentage, type a percentage amount in the % field.
If you chose running time, type the number of minutes into the Mins. field.
6. Click the OK button.
99
Chapter 6: PASM