Connecting to PASM
The Promise Advanced Storage Manager (PASM) software is factory-installed on
the SmartStor system. PASM runs in the browser on your PC. You can access
PASM:
•
Directly in your browser. See page 18.
•
Through SmartSYNC. See page 19.
Browser Support
Choose one of the following browsers to use with PASM:
•
Internet Explorer
•
Mozilla
•
Firefox
Finding the SmartStor's IP Address
To access the SmartStor in your browser, you must know the SmartStor's IP
address. Use SmartSYNC for this purpose.
1.
From the Windows Start menu, choose Programs, then Promise NAS Utility,
and then SmartSYNC.
2.
To open the SmartSYNC window, in the Windows
application tray (lower right corner of the screen),
double-click the SmartSYNC icon.
The SmartSYNC screen appears with the Server
Information tab displayed. The IP address of the
SmartStor shown in the Server List.
Chapter 2: Installation and Setup
•
Netscape Navigator
•
Safari (MacOS X)
IP address of the SmartStor
detected on the network
17
SmartSYNC icon