Chapter 3: Connecting To The Smartstor; Setting Up A Network Drive On A Windows Pc - Promise Technology SmartStor NS4600 Product Manual

Chapter 3: Connecting to the SmartStor

• Setting up a Network Drive on a Windows PC (page 31)
• Setting up a Network Drive on a UNIX or Linux PC (page 36)
• Setting up a Network Drive on a Mac (page 41)
• Connecting a USB Printer to SmartStor (page 45)
• Setting up the Print Server on SmartStor (page 46)
• Setting up Windows Printing (page 47)
• Setting up Linux Printing (page 50)
• Setting up Mac Printing (page 53)
• Connecting a USB Drive (page 55)
• Disconnecting a USB Drive (page 57)
• Setting-up Apple iTunes (page 58)
To copy files to and from a folder on the SmartStor, you must make the folder a
network drive on your PC.
To use the SmartStor as a print server, you must connect the USB printer, enable
SmartStor's print server, and set up printing on your PC.

Setting up a Network Drive on a Windows PC

You can also use SmartNAVI for this purpose, see "Mounting a Share Folder /
Creating a Network Drive" on page 98. If your PC does not have SmartNAVI, use
the following procedure to setup a Network Drive with My Network Places.
Using the SMB protocol, SmartStor supports up to 16 concurrent connections.
To setup a network drive:
31