Setting Up The Smartstor - Promise Technology SmartStor NS4300N Product Manual

Setting up the SmartStor

The SmartWizard performs the setup procedures on your SmartStor.
To set up your SmartStor:
1. From the Windows Start menu, choose Programs, then Promise NAS Utility,
then SmartWizard.
The SmartWizard welcome screen appears.
2. From the Choosing a language dropdown menu, choose the language you
prefer.
3. Choose an Initiation Mode.
Click the Express Mode option if ALL of these conditions apply:
• You have a DHCP server on your network with addresses available.
• You want data protection for your RAID Volume.
• You want to use date and time settings from your PC.
The SmartWizard will overwrite all existing settings on the
SmartStor. In most cases, you should only run the SmartWizard
one time—when you first set up your SmartStor.
Chapter 2: Installation and Setup
Caution
13