Installing Application Plug-Ins - Promise Technology SmartStor NS4300N Product Manual

Installing Application Plug-ins

Application plug-ins are enhancements to SmartStor's capabilities. The DLNA
server, which enables SmartStor to support the UPnP protocol, is one example of
an application plug-in.
Follow this procedure to install an application plug-in on your SmartStor.
Downloading an Application Plug-in File
To download a plug-in file:
1. Point your browser to http://www.promise.com/support/support_eng.asp.
2. Choose the application plug-in file you want and download it to your PC.
3. Copy the plug-in file from your PC to a folder on the SmartStor.
Installing an Application Plug-in File
1. Start the PASM interface.
2. In the Tree, click the + beside the Management icon.
3. Click the System Upgrade icon.
4. Click the Application Plug-in tab.
5. From the Volume dropdown menu, choose the Volume that has the folder
with the plug-in file.
6. From the Folder dropdown menu, choose the Folder that contains the
plug-in file.
7. In the File Name field, type the name of the plug-in file.
Or highlight the file and copy the name, then paste the name into the field.
8. Click the OK button to begin the installation.
When the installation is done, the SmartStor reboots automatically. When
the SmartStor beeps once, it is ready for use.
Do not disconnect the power or shut down the SmartStor while the
installation is running!
Warning
151
Appendix B: Maintenance