SmartStor NS4300N Product Manual
Figure 6. Power Button, System Status and Ethernet Activity LEDs
Multiple Network Connections
If your PC has multiple network connections, you must verify that SmartSYNC is
looking on the network where the SmartStor is installed:
1.
Open SmartSYNC.
In the Windows application tray (lower right corner of
the screen), double-click the SmartSYNC icon.
2.
From the Option menu, choose Scan Network
Interface.
3.
In the dropdown menu, choose the IP address of the network interface card
connected to the network where you installed the SmartStor. See Figure 7.
Figure 7. Scan Network Interface in SmartSYNC
126
Power Button
System Status
LED
Ethernet
Activity LED
SmartSYNC icon