Antennas - HP EliteDesk 705 G5 Maintenance And Service Manual

Antennas

The antennas route from the WLAN module to the front and the rear of the computer.
Before removing the antennas, follow these steps:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Remove the drive cage
Remove the antennas:
1. Disconnect the internal antennas from the WLAN module
2. Remove the antenna cable from the clips on the inside of the I/O bracket.
3. Remove the Torx screw that secures the antenna to the front of the computer (1).
4. Pull the antenna through the hole and away from the computer (2).
5. On the inside of the chassis, remove the rear antenna cable from the routing path in the chassis wall.
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 24).
(Drive cage on page 26).
23).
(WLAN module on page
20).
48).
Antennas 55