Antennas - HP EliteDesk 800 G5 SFF Maintenance And Service Manual

Antennas

The wireless antennas are secured to both the front and back of the computer behind.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Disconnect the antenna cables from the WLAN module
5. Remove the cable from routing path on the inside wall of the chassis (1).
6. Press down on the tab at the top of the antenna cover (2), and then rotate the cover downward to
remove it (3).
7. Remove the Torx T15 screw that secures the antenna to the front of the chassis (4), and then pull the
antenna off the chassis and the cable out of the chassis (5).
8. Remove the antenna cable from the clips along the front of the chassis (1).
50 Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page 19).
(Front bezel on page 20).
18).
(WLAN module on page 47).