Diagnostics; Failures And Hints; Other, So Far Not Identified Problems - DIGITAL-LOGIC Microspace MSM586SEN Technical User Manual

DIGITAL-LOGIC AG
17 D
IAGNOSTICS
17.1

Failures and hints

17.1.1

Other, so far not identified problems

A. If the display works:
1. Check if you have a bootable floppy or harddisk
2. Check the CMOS parameter with the setup tools
3. Reset the CMOS RAM with taking off the battery
4. Re-enter the correct values with Setup
B. If no display on the screen is available:
1. Check the power circuitry
2. Check the polarities of the cables
3. Measure the voltage of the power supply under load and offload
4. Measure the current between the supply and the MICROSPACE PC
5. Connect a floppy: does the bezel LED light blink?
6. Does the harddisk spindle motor start?
7. Reset the CMOS-RAM
C. If the error appears again
1. Contact your nearest DIGITAL-LOGIC distributor for Technical Support.
2. Or fill out the support request form (SRF) on the Internet:
MSM586SEN/SEV Manual V1.5E
http://www.digitallogic.com
110
/ Support