DIGITAL-LOGIC Microspace MSM586SEN Technical User Manual
  1. Manuals
  2. Brands
  3. DIGITAL-LOGIC Manuals
  4. Computer Hardware
  5. Microspace MSM586SEN
  6. Technical user manual

DIGITAL-LOGIC Microspace MSM586SEN Technical User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TECHNICAL USER'S MANUAL FOR:
PC/104
MSM586SEN/SEV
(optional SN/SV)
Nordstrasse 11/F
CH- 4542 Luterbach
Tel.:
++41 (0)32 681 58 00
Fax:
++41 (0)32 681 58 01
Email:
support@digitallogic.com
Homepage:
http://www.digitallogic.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Microspace MSM586SEN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for DIGITAL-LOGIC Microspace MSM586SEN

Summary of Contents for DIGITAL-LOGIC Microspace MSM586SEN

  • Page 1 TECHNICAL USER'S MANUAL FOR: PC/104 MSM586SEN/SEV (optional SN/SV) Nordstrasse 11/F CH- 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.com Homepage: http://www.digitallogic.com...

  • Page 2: Revision History

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E COPYRIGHT © © © © 1999- 2004 BY DIGITAL-LOGIC AG No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, in any form or by any means, electronic, mechanical, optical, manual, or otherwise, without the prior written permis- sion of DIGITAL-LOGIC AG.

  • Page 3: Table Of Contents

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Table of Contents 1 Preface..........................6 Trademarks........................6 Disclaimer......................... 6 Environmental Protection Statement................6 Explanation of Symbols....................7 For Your Safety ........................ 9 Limited Two Year Warranty ................... 10 2 Overview........................11 Standard Features......................11 Unique Features ......................11 MSM586SEN/SEV block diagram ................
  • Page 4 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E EEPROM saved CMOS Setup ..................46 CORE / VGA - BIOS download function................ 47 5.6.1 CORE BIOS download function ....................47 5.6.2 VGA BIOS download function....................48 Memory ........................... 49 5.7.1 System Memory Map ......................... 49 5.7.2...
  • Page 5 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 17 Diagnostics .......................110 17.1 Failures and hints ..................... 110 17.1.1 Other, so far not identified problems..................110 17.2 POST-CODE Description ..................111 17.2.1 Boot Loader..........................111 17.2.2 Error Beep codes ........................111 17.2.3 System BIOS in Shadow RAM....................111 17.2.4...

  • Page 6: Preface

    DIGITAL-LOGIC AG reserves the right to revise this publication from time to time without obligation to notify any person of such revisions Environmental Protection Statement This product has been manufactured to satisfy environmental protection requirements where possible.

  • Page 7: Explanation Of Symbols

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Explanation of Symbols CE Conformity This symbol indicates that the product described in this manual is in compliance with all applied CE standards. Please refer also to the section “Applied Standards” in this manual. Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (>...
  • Page 8 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E This symbol and title warn of general hazards from mechanical, electrical, chemical failure. This may Endager your life/health and/or result in damage to your material.

  • Page 9: For Your Safety

    However, the life expectancy of your product can be drasti- cally reduced by improper treatment during unpacking and installation. Therefore, in the interest of your own safety and of the correct operation of your new Digital-Logic product, you are requested to conform with the following guidelines.

  • Page 10: Limited Two Year Warranty

    AG, Switzerland. This warranty is limited to the original purchaser of product and is not transferable. During the one year warranty period, DIGITAL-LOGIC AG will repair or replace, at its discretion, any defec- tive product or part at no additional charge, provided that the product is returned, shipping prepaid, to DIGITAL-LOGIC AG.

  • Page 11: Overview

    Floppy disk interface AT-IDE harddisk interface VGA/LCD video interface PC/104 embedded BUS Unique Features The MICROSPACE includes all standard PC/AT functions plus unique DIGITAL-LOGIC AG enhancements, such as: Single 5 volt supply LAN Ethernet 82559ER DOC2000 Compact card. typ 1...

  • Page 12: Msm586Sen/Sev Block Diagram

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E MSM586SEN/SEV block diagram JTAG Port ELAN520 DRAM SODIMM up to 128 Mbyte LiBAT PCI-BUS MAX2ll MAX2ll COM1 COM2 VRAM Ethernet 2 MB LCD/VGA Controller 69000 INTEL 82559ER LCD CRT 100/10BASE-T ISA-BUS DOC2000 Watchdog EEPROM EIDE...

  • Page 13: Specifications

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Specifications Specification CPU: AMD ELAN520 – 133MHz Compatibility: 8086 – Pentium 1. Level Cache: 16k data and 16k code 2. Level Cache: None Socket: Clock 133MHz 33MHz Powermanagement None FPU: Integrated Specification Chipset: Nordbridge AMD ELAN520...
  • Page 14 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Specification External Interface Videointerfaces CRT1, LCD for TFT and STN USB V1.1 Not available LPT1: Internal COM1: RS232 COM2: RS232 COM3: RS232 COM4: RS232 Keyboard: PS/2 Mouse: PS/2 Floppy: 26pin FCC Interface for TEAC Minifloppy Harddisk: 1 channel 44pin RM2.0mm ATAIDE-cable...
  • Page 15 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Specification EMI / EMC Tests If all signals are externaly filtered and assembled into a closed metalic case ! EMC emission EN61000-6-2:2001 Conducted disturbance EN55022 Class B Radiated disturbance EN55022 Class B EMC immunity EN61000-6-2...

  • Page 16: Bios History

    CAPABLE” means only that DIGITAL-LOGIC has verified that the product as a whole meet this definition when tested as a stand-alone product in a test lab, but dies not mean that DIGITAL-LOGIC has verified that the product is “YEAR 2000 CAPABLE” as used in your particular situation or configuration. DIGITAL-LOGIC makes no representation about individual components, including software, within the product should they be used independently from the product as a whole.

  • Page 17: Mechanical Dimensions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Mechanical Dimensions 2.7.1 Board version V2.2/2.3/2.4/2.5...

  • Page 18: Board Version V2.2/2.3/2.4/2.5

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 2.7.2 Board version V2.2/2.3/2.4/2.5...

  • Page 19: Incompatibilities To A Standard Pc/At

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Incompatibilities to a standard PC/AT A. Do not use internal COM1/2 of the ELAN520 in the FIFO-Mode. AMD Errata Some bits are lost in certain configurations of FIFO-Mode an in extended temperature ranges. Solution: Use the COM3/4 for FIFO Mode. Use a None-FIFO-Driver ! B.

  • Page 20: Thermoscan

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 2.11 Thermoscan With standard cooler:...

  • Page 21: High Frequency Radiation (To Meet En55022 & En61000)

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 2.12 High frequency radiation (to meet EN55022 & EN61000) Since the PC/104 CPU modules are very high integrated embedded computers, no peripheral lines are pro- tected against the radiation of high frequency spectrum. To meet a typical EN55022 requirement, all periph- erals, they are going outside of the computer case, must be filtered externaly.

  • Page 22: Pc/104 Bus Signals

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E PC/104 B IGNALS Please note, that may not all of the signals are available on this board (check chapter “Description of the connectors”) AEN, output Address Enable is used to degate the microprocessor and other devices from the I/O channel to allow DMA transfers to take place.
  • Page 23 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E /IOW, input/output I/O Write instructs an I/O device to read the data on the data bus. It may be driven by any microprocessor or DMA controller in the system. This signal is active low. IRQ[ 3 - 7, 9 - 12, 14, 15], input These signals are used to tell the microprocessor that an I/O device needs attention.
  • Page 24 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E SAO-SA19, LA17 - LA23 input/output Address bits 0 through 19 are used to address memory and I/0 devices within the system. These 20 address lines, allow access of up to 1MBytes of memory. SAO through SA19 are gated on the system bus when BALE is high and are latched on the falling edge of BALE.
  • Page 25 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E +/- 5% used only for the flatpanel supply. GROUND = 0V used for the entire system. VCC, +5V +/- 0.25V for logic and harddisk/floppy supply. For further Informations about PC/104 and PC/104plus, please refer to the PC/104 specification manual which is available on the internet.

  • Page 26: Bus Levels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Bus levels The bus currents are as follows: Output Signals: IOH: IOL: D0 - D16 8 mA 8 mA A0 - A23 8 mA 8 mA MR, MW, IOR, IOW, RES, ALE, AEN, C14 8 mA...

  • Page 27: Detailed System Description

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E ETAILED YSTEM ESCRIPTION This system has a system configuration based on the ISA architecture. Check the I/O and the memory map in this chapter. Power Requirements The power is connected through the PC/104 power connector; or the separate power connector on the board.
  • Page 28 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E MSM586SEV –30° C/+25° C/+85° C Current at +5Volt supply at Mode Memory DLAG-Nr. -30 ° C +25° C +85 ° C MSM586SEV (DLAG: 801360) [mA] [mA] [mA] 32MB/2 = 16 MB 890645 SDRAM 1290 1200 1200 DOSv6.22: A:\...

  • Page 29: Cpu, Boards And Rams

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CPU, Boards and RAMs 4.2.1 CPUs of this MICROSPACE Product Processor: Type: Clock: Landmark MHz: Landmark Units: ELAN520 133 MHz 4.2.2 Numeric Coprocessor Is integrated into the ELAN520. 4.2.3 DRAM Memory 70ns Speed: SDRAM SODIMM144...

  • Page 30: Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Interface 4.3.1 Keyboard AT compatible and PS/2 Mouse Signal Pin 1 Speaker out Pin 2 Pin 3 Ext. reset input Pin 4 Pin 5 Keyb. Data Pin 6 Keyb. Clock Pin 7 Pin 8 External battery 3.0V...
  • Page 31 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.3.1 RS485 remark 4.3.3.1.1 RS-485 RS-485 is a multi-drop extension to the RS-422 standard. It uses differential signals on twisted pairs for re- ceive and transmit. RS-485 systems can be half duplex 2-wire systems (one twisted pair plus signal common/ground) or full duplex 4-wire systems.
  • Page 32 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.3.1.3 If you are a software developer: It is a lot easier to get the RTS turn-off timing exact under MS-DOS than under Windows. Under MS-DOS, simply wait for both the TX-buffer-empty and all-sent UART flags to go true and then drop RTS. Under Win-...

  • Page 33: Floppy Disk Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.4 Floppy Disk Interface The onboard floppy disk controller and ROM-BIOS support one floppy disk drive in any of the standard PC- DOS and MS-DOS formats shown in the table . Supported Floppy Formats Capacity...

  • Page 34: Speaker Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.5 Speaker interface One of the board's CPU device provides the logic for a PC compatible speaker port. The speaker logic signal is buffered by a transistor amplifier, and provides approximately 0.1 watt of audio power to an external 8 ohm speaker.

  • Page 35: Controllers

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Controllers 4.4.1 Interrupt Controllers An 8259A compatible interrupt controller, within the ELAN520 chipset, provides seven prioritized interrupt levels. Some of these IRQ's are normally associated with the board's onboard device interfaces and control- lers, and several are available on the AT expansion bus.

  • Page 36: Internal Battery Backed Clock (Rtc)

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.5.2 Internal Battery backed clock (RTC) An AT compatible date/time clock is located within the chipset. The device also contains a CMOS static RAM, compatible with that in standard ATs. System configuration data is normally stored in the clock chip's CMOS RAM in a manner consistent with the convention used in other AT compatible computers.

  • Page 37: Watchdog

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.5.4 Watchdog The watchdog function is an implemented function of the ELAN520 and must be set/triggered by the • application The watchdog is hardware triggered and will be activated also in case of a hanging system •...

  • Page 38: Boottime

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Boottime Testenvironment for the powerconsumption measurement: Peripherie: Harddisk Hitachi Mod-DK23AA-60 DLAG: 890005 Monitor Compaq Mod-460 CompactFlash ONT-0515-0006 64MB DLAG: 890013 DOC2000 16 MB DLAG: PS/2-KB Logitech Mod-iTouch Keyboard PS/2-MS Logitech Mod-M-CAA43 Floppy TEAC Mod-FD-05HF Software: MS-DOS v6.22...

  • Page 39: Bios

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 5 BIOS More details are available in the separate BIOS manual on our CD and homepage ! ROM-BIOS sockets An EPROM socket with 8 Bit wide data access normally contains the board's AT compatible ROM-BIOS.

  • Page 40: Bios Cmos Setup

    On the next setup pages (switch with TAB) the values for special parameters are modifiable. Normally the parameters are set correctly by DIGITAL-LOGIC AG. Be very careful in modifying any parameter since the system could crash. Some parameters are dependent on the CPU type. The cache parameter is always available, for example.
  • Page 41 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Location Description Time of day (seconds) specified in BCD Alarm (seconds) specified in BCD Time of Day (minutes) specified in BCD Alarm (minutes) specified in BCD Time of Day (hours) specified in BCD Alarm (hours) specified in BCD...
  • Page 42 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description CMOS Location for Bad CMOS and Checksum Flags bit 7 = Flag for CMOS Lost Power Power OK Lost Power bit 6 = Flag for CMOS checksum bad Checksum is valid...
  • Page 43 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description Equipment bits 7-6 = Number of Diskette Drives One diskette drive Two diskette drives 10, 11 = Reserved bits 5-4 = Primary Display Type Adapter with option ROM CGA in 40 column mode...
  • Page 44 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description Reserved EMS Memory Size Low Byte EMS Memory Size High Byte 1Fh – Custom Drive Table 0 These 6 bytes (48 bits) contain the following data: Cylinders Landing Zone 10 bits...
  • Page 45 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description Byte 3 bits 7-6 = Reserved bits 5-0 = Upper 6 Bits of Write Precompensation Byte 4 bits 7-0 = Number of Heads Byte 5 bits 7-0 = Sectors Per Track...

  • Page 46: Eeprom Saved Cmos Setup

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E EEPROM saved CMOS Setup The EEPROM has different functions, as listed below: • Backup of the CMOS-Setup values. • Storing system informations like: version, production date, customisation of the board, CPU type. • Storing user/application values.

  • Page 47: Core / Vga - Bios Download Function

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CORE / VGA - BIOS download function Before downloading a BIOS, please check as follows: Make a MSDOS 6.22 bootable diskette including the following files: DELEP520.EXE Flash520.exe core BIOS (M520xxx.cor) lcd_file.000 IMPORTANT: Do not use boot disks created in a Windows operating system. If you do not have a MSDOS 6.22 disk avail- able, you can download a boot disk from www.bootdisk.com...

  • Page 48: Vga Bios Download Function

    The previously loaded VGA- BIOS is not corresponding 100% or works only on the LCD properly. If the screen is dark after the reboot of the system: A new system BIOS must be programmed. Ask DIGITAL-LOGIC AG for the binary file. If the previous version is still programmed: Switch off the board and do not make a warm boot due to the fact that the data may are still stored in the memory shadow.

  • Page 49: Memory

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 5.7.1 System Memory Map The ELAN520 CPU used as central processing unit on the MICROSPACE has a memory address space which is defined by 32 address bits. Therefore, it can address 1 GByte of memory. The memory address...
  • Page 50 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0008h DMA channel 0-3 command register bit 7 = DACK sense active high/low high bit 6 = DREQ sense active high/low high bit 5 = Write selection Late write selection...
  • Page 51 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 000Ch DMA clear byte pointer flip/flop 000Dh DMA read temporary register 000Dh DMA master clear 000Eh DMA clear mask register 000Fh DMA write mask register 0020h Programmable Interrupt Controller -...
  • Page 52 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0021h R / W PIC master interrupt mask register (OCW1) bit 7 Enable parallel printer interrupt bit 6 Enable diskette interrupt bit 5 Enable hard disk interrupt bit 4...
  • Page 53 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0022h R / W Chipsset Register Adress 0023h R / W Chipsset Register Data 0040h R / W Programmable Interrupt Time read/write counter 0, key- board controller channel 0...
  • Page 54 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0064h Keyboard controller read status bit 7 No parity error Parity error on keyboard transmission bit 6 No timeout Received timeout bit 5 No timeout Keyboard transmission timeout bit 4...
  • Page 55 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 00A0h - 00A1h are reserved for the slave programmable interrupt controller. The bit definitions are identical to those of addresses 0020h - 0021h except where indicated. 00A0h R / W...
  • Page 56 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 00D2h Write request register for DMA channels 4-7 00D4h Write single mask register bit for DMA channels 4-7 bits 7-3 = 0 Reserved bit 2 Clear mask bit, 1 Set mask bit...
  • Page 57 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0173h R / W Sector number for hard disk 1 0174h R / W Number of cylinders (low byte) for hard drive 1 0175h R / W Number of cylinders (high byte) for hard drive 1...
  • Page 58 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 01F6h R / W Drive/Head register for hard drive 0 bit 7 bit 6 bit 5 bit 4 = Drive select First hard drive Second hard drive bits 3-0 = Head select bits...
  • Page 59 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status I/O addresses 02F8h - 02FFh are reserved for use with serial port 2. See the bit defini- tions for I/O addresses 03F8h - 03FFh. 02F8h Transmitter holding register for serial port 2...
  • Page 60 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 037Ah R / W Control port for parallel port 1 bits 7-5 = Reserved bit 4 Enable IRQ bit 3 Select printer bit 2 Initialize printer bit 1 Automatic line feed...
  • Page 61 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 03F4h Status register for primary diskette drive controller bit 7 Data register is ready bit 6 Transfer from system to controller Transfer from controller to system bit 5 Non-DMA mode...
  • Page 62 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 03F8h R / W Baud rate divisor (low byte) - This byte along with the high byte (03F9h) store the data transmission rate divisor. bits 7-0 = Data bits 0-7 when the Divisor Latch Access...
  • Page 63 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 03FDh Line status register - serial port 1 bit 7 = Reserved bit 6 Transmitting shift and holding registers empty bit 5 Transmitter shift register empty bit 4 Break interrupt...

  • Page 64: Bios Data Area Definitions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions The BIOS Data Area is an area within system RAM that contains information about the system envi- ronment. System environment information includes definitions associated with hard disks, diskette drives, keyboard, video, as well as other BIOS functions. This area is created when the system is first powered on.
  • Page 65 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 15h - 16h Reserved Keyboard Shift Qualifier States bit 7 = Insert mode bit 6 = CAPS lock bit 5 = Numlock bit 4 = Scroll Lock bit 3...
  • Page 66 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description Diskette Drive Motor Status bit 7 = Current operation Write or Format Read or Verify bit 6 = Reserved bits 5-4 = Drive Select Drive A Drive B...
  • Page 67 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 50h - 5Fh Position of cursor for each video page. Current cursor po- sition is stored two bytes per page. First byte specifies the column, the second byte specifies the row.
  • Page 68 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 78h - 7Bh Default parallel port timeout values 7Dh - 7Fh Default serial port timeout values 80h - 81h Pointer to start of keyboard buffer 82h - 83h...
  • Page 69 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 92h - 93h Scratch area for diskette media. Low byte for drive A, high byte for drive B. 94h - 95h Current track number for both drives. Low byte for drive A, high byte for drive B.

  • Page 70: Compatibility Service Table

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 5.8.1 Compatibility Service Table In order to ensure compatibility with industry-standard memory locations for interrupt service routines and miscellaneous tabular data, the BIOS maintains tables and jump vectors. Location Description FE05Bh Entry Point for POST...

  • Page 71: Vga, Lcd

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 6 VGA, LCD VGA / LCD controller 69000 69000 High Performance Flat Panel / CRT HiQVideo Accelerator with Integrated Memory • Highly integrated Flat Panel and CRT GUI Accelerator & Multimedia Engine, Palette/DAC, Clock Synthe- sizer, and integrated frame buffer •...

  • Page 72: Display Modes Supported

    3.3V but can tolerate 5V operation. Software Compatibility / Flexibility The 69000 is fully compatible with the VGA standard at both the register and BIOS levels. DIGITAL-LOGIC supply a fully VGA compatible BIOS, end-user utilities and drivers for common application programs.

  • Page 73: Vga/Lcd Bios Support

    FOR A NEW LCD TYPE, NOT AVAILABLE NOW: If the LCD BIOS for your LCD is not available, DIGITAL-LOGIC will adapt the LCD and provide you with one working cable. To initialise this, we need the following points from you:...

  • Page 74: Memory 69000 Crt/Tft Panels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 69000 CRT/TFT panels Hor. Vert. Color Refr. DCLK Cursor FB/C FB/M Video Total Total Resol. Resol. kByte kByte kByte kByte Input with kByte Video Video 25.175 31.500 31.500 36.000 25.175 31.500 31.500 36.000 25.175 1204 31.500...

  • Page 75: Memory 69000 Color Stn-Dd Panels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 69000 color STN-DD panels Hor. Vert. Color Refr. DCLK Cursor FB/C FB/M Video Total Total Resol. Resol. kByte kByte kByte kByte Input with kByte Video Video 25.175 31.500 31.500 36.000 25.175 1024 31.500 1024 31.500...

  • Page 76: Memory 69000 Mono Stn-Dd Panels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 69000 Mono STN-DD panels Hor. Vert. Color Refr. DCLK Cursor FB/C FB/M Video Total Total Resol. Resol. kByte kByte kByte kByte Input with kByte Video Video 25.175 31.500 31.500 36.000 25.175 31.500 31.500 36.000 25.175...

  • Page 77: Description Of The Connectors

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E ESCRIPTION OF THE CONNECTORS Flat cable 44pin IDE is: IDT Terminal for Dual Row (2.00mm grid) and 1.00mm flat cable • All others are: IDT Terminal for Dual Row 0.1" (2.54mm grid) and 1.27mm flat cable •...
  • Page 78 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Serial Port COM1 (from ELAN520) Header onboard: RS232 Signal RS485 Signal * D-SUB connector: Pin 1 = DCD Pin 1 Pin 2 = DSR Pin 6 Pin 3 = RxD Pin 2 Pin 4 = RTS...
  • Page 79 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Floppy Disk Interface- connector (MOLEX 26pin FCC) FD26: Signal Name Function in/out +5 volts Index Pulse +5 volts Drive Select 2 +5 volts DCHG Disk Change Motor On 2 DIRC Direction Select STEP Step Write Data...
  • Page 80 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Printerport (Centronics) The printer connector provides an interface for 8 Bit centronics printers. Header onboard: D-SUB connector: Signal Pin 1 Pin 1 = Strobe Pin 3 Pin 2 = Data 0 Pin 5 Pin 3...
  • Page 81 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E The Utility connector must be wired to a standard AT-female connector: Frontside AT-Keyboard (female) Solderside AT-Keyboard (female) Data (2) Data (2) Ground (4) VCC (5) VCC (5) Ground (4) Clock (1) Clock (1) PS/2 Frontside (female)
  • Page 82 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E LCD connector VGA-LCD Interface (flatpanel signals): Signals P20-P23 are located on the J7M connector Signal Signal M / DE Signal Line Pulse LP VCC-LCD (1A), Selected by J51 VEESAVE (5V/1A) Shift Clock VBACKSAVE (12V/1A) Contrast resistor pin 1 *)
  • Page 83 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E VGA Monitor (CRT-Signals) J7 L/M Header 15 pins HiDensity D-SUB 40 Pin -L 10 Pin -M Signal Signal Pin 32 Pin 2 VGA red Pin 1 Pin 34 Pin 4 VGA green Pin 2 Green...
  • Page 84 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E LAN LED Signal Remarks LILEDX / Link LED 330 Ohm resistor on board VCC3 ACTLEDX / Activity LED 330 Ohm resistor on board JTAG connector (debugging) Signal Signal CMDACK BREAK STOP TRACE TRST RESETIN Spare connector (not assembled), for test purposes only...
  • Page 85 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E PC/104 BUS interface Ground Ground (IOCHCK) NC Ground SBHE MEMCS16 RESET LA23 IOCS16 (+5V) NC LA22 IRQ10 IRQ9 LA21 IRQ11 LA20 IRQ12 DRQ2 LA19 IRQ15 (-12V) NC LA18 IRQ14 (0WS) NC LA17 DACK0 +12V MEMR...
  • Page 86 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Battery connector Signal Pin 1 Battery 3.6V Pin 2 Ground U112 DOC 2000 IC- socket Signal Signal Compact card holder, typ1 Signal Pin 01 = GND Pin 02 = D3 Pin 03 = D4 Pin 04...
  • Page 87 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Signal Pin 28 = D12 Pin 29 = D13 Pin 30 = D14 Pin 31 = D15 Pin 32 = CS1 (active low) Pin 33 = (Vs1) NC Pin 34 = IOR (active low) Pin 35...
  • Page 88 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E SODIMM (Small Outline- Dual Inline Memory Module), 144pins Normal Description Normal Description Ground Ground Not connected Data 0 Ground DQ32 Data 32 Ground Data 1 DQ33 Data 33 Data 2 DQ34 Data 34 Data 3...
  • Page 89 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Normal Description Normal Description +5 VDC +5 VDC DQ28 Data 28 DQ60 Data 60 Don't use DQ29 Data 29 Don't use DQ61 Data 61 +5 VDC DQ30 Data 30 +5 VDC DQ62 Data 62 Don't use...

  • Page 90: Jumper Locations On The Board

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E UMPER LOCATIONS ON THE BOARD Jumper locations on the board The figure shows the location of all jumper blocks on the MSM586SEN/SEV board. The numbers shown in this figure are silk screened on the board so that the pins can easily be located. This chapter refers to the individual pin for these jumpers.

  • Page 91: Jumpers Locations On The Msm586Sen/Sev V2.2/2.3/2.3A/2.4/2.5

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Jumpers locations on the MSM586SEN/SEV V2.2/2.3/2.3a/2.4/2.5 Top side: Remark: The connectors J49/50 of the old Version V2.1. were not at the same position, as above defined. There were closer placed.
  • Page 92 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Bottom side:...

  • Page 93: Led Criterions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 9 LED CRITERIONS Color Function green Primary HDD green LAN linked green LAN active green LAN speed...

  • Page 94: Cable Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E ABLE INTERFACE 10.1 The harddisk cable 44pin IDT Terminal for Dual Row (2.00 mm grid) and 1.00 mm flat cable. 44 pins = 40 pins signal and 4 pins power. Max. length for the IDE cable is 30 cm.

  • Page 95: The Com 1/2/3/4 Serial Interface Cable

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 10.2 The COM 1/2/3/4 serial interface cable DT terminal for dual row 0.1" (2.54 mm grid) and 1.27 mm flat cable. Line of pin 1 COM1 9pin D-Sub male COM1/2 ATTENTION: Do not short-circuit these signal lines.

  • Page 96: The Printer Interface Cable (P1)

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 10.3 The printer interface cable (P1) IDT terminal for dual row 0.1" (2.54mm grid) and 1.27 mm flat cable Parallelport Cable LPT1 ATTENTION: Maximum length of this cable is 6 meters. Prevent short-circuits. Never apply power to these signals, the MICROSPACE MSM586SEV will be destroyed.

  • Page 97: The Micro Floppy Interface Cable

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 10.4 The Micro Floppy interface cable...

  • Page 98: Remote Function

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 11 R EMOTE UNCTION Remote works only with the COM 1 port on the MSM586SEN/SEV. BIOS default settings are normally as follows: Internal ELAN A COM 1 Internal ELAN B NONE SUPER I/O C NONE...

  • Page 99: Remote Enabler

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E When video redirection is enabled (option NOVIDEO not active), the BIOS will skip the initialization of both ISA and PCI VGA cards. The BIOS thereby comes up much quicker. Using the keyword DUALVIDEO will enable possible VGA cards as well and display video output on both the real video card and on the remote machine.

  • Page 100: Restrictions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Optional: The wiring of the parallel DOS/Link-Cable (DSUB 25pin) is as follows: PC1 (Host) PC2 (Target) Signal Name DSUB-Pin Number DSUB-Pin Number Signal Name ERROR# − − SLCT − − − − ACK# − −...

  • Page 101: 100/10 Ethernet Lan

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 100/10 E THERNET Required programs and drivers are located on our CD in the directory x:\DRIVERS\NETWORK\INTEL\ 13.1 Intel 82559ER Ethernet chip Create a directory C:\network on your harddisk. Copy the programs and drivers of x:\DRIVERS\NETWORK\INTEL\82559ER\ onto your HD.

  • Page 102: Driver Installation Windows 95

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 13.1.2 Driver installation WINDOWS 95 Copy Intel Pro100+ driver on HD (x:\drivers\network\intel\82559ER). De-install all networkdrivers under Windows95 in system and software folders and restart Windows. Networkcard Pro10 PCI will be auto-detected and all drivers can be installed (of the copied directory).

  • Page 103: Intel 82559 Ethernet Chip

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 13.2 Intel 82559 Ethernet chip Create a directory C:\LAN100 on your harddisk. Copy the programs and drivers of x:\DRIVERS\NETWORK\INTEL\82559\ onto your HD. 13.2.1 Installation example for MSDOS Novell 4.11 run “setup.exe” in the directory c:\lan100\...

  • Page 104: Eeprom Update

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 13.2.4 EEPROM update Do not use this function, if the EEPROM is not corrupted ! To download the data into the EEPROM, make the following steps: start MSDOS change into the directory: c:\lan100\utility\e2prom\... type the following string: eeupdate –all lan100.eep lan100.dat...

  • Page 105: Installing The Flashdisk Doc2000

    DOC2000 NSTALLING THE FLASHDISK On the SSD 36pin socket a DiskOnChip DOC2000 module from M-Systems may be installed. This device is also available at DIGITAL-LOGIC AG. Operating Systems: DOS, DL-DOS, RTX-DOS, WIN 3.11, ROM-WIN are working with these drives. All other non DOS compatible systems need a driver.

  • Page 106: Special Peripherals, Configuration

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E PECIAL ERIPHERALS ONFIGURATION 15.1 The special function interface for MICROSPACE computers SFI All functions are performed by starting the SW-interrupt 15hex with the following arguments: Function: WRITE TO EEPROM Number: Writes the Data byte into the addressed User-Memory-Cell from Description: the serial EEPROM.
  • Page 107 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Function: WRITE PRODUCTION DATE & RESET DLAG-COUNTERS Number: Writes the production date into the addressed DLAG-Memory- Cell from the serial EEPROM. The old value is automatically de- Description: leted. If the Password is also in DX, the counters will be resettet...
  • Page 108 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Function: READ INFO 2 FROM EEPROM Number: Reads the information bytes out of the serial EEPROM Description: DLAG Int15 function Input values: Function request Board Type BOARD TYPE ('M'=PC/104, 'E'=Euro, 'W'=MSWS, Output values: 'S'=Slot, 'C'=Custom, 'X'= smartCore or smartModule CPU Type bits 1…7 and board type bits 8…15 (CPU type:...

  • Page 109: Building A System

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E UILDING A SYSTEM To build up a system based on your board, you should prepare the following equipments: A stable power supply of 5V (> 3 ampères), depending on the cpu, memory, etc. Assemble CPU with the proper clk- settings and cooling (fan) depending on board.

  • Page 110: Diagnostics

    Connect a floppy: does the bezel LED light blink? Does the harddisk spindle motor start? Reset the CMOS-RAM C. If the error appears again Contact your nearest DIGITAL-LOGIC distributor for Technical Support. Or fill out the support request form (SRF) on the Internet: http://www.digitallogic.com / Support...

  • Page 111: Post-Code Description

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 17.2 POST-CODE Description More details are available in the separate BIOS manual on our CD and homepage ! 17.2.1 Boot Loader DIAG_SYSTEM_INIT Boot started DIAG_A20_DISABLE Disable A20 through A20 DIAG_INIT_CHIPSET Initialize CS DIAG_TEST_RAM Test RAM...

  • Page 112: Error Beep Codes

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E DEBUG_RAM_SIZE_DONE RAM test completed DEBUG_RAM_PROT_EXIT Protected mode exit successful DEBUG_CS_SHADOW_SETUP Setup Shadow DEBUG_VIDEO_EQUIP_INIT_INIT Going To Initialize Video DEBUG_VIDEO_BW_SEARCH Search For Monochrome Adapter DEBUG_VIDEO_COLOR_SEARCH Search For Color Adapter DEBUG_VIDEO_SIGNON Signon messages displayed DEBUG_OEM_CONFIG_KBD_CTL special init of keyboard ctlr...

  • Page 113: Assemblings View

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 18 A SSEMBLINGS VIEW 18.1 MSM586SV/SN – SEV/SEN V2.3a/2.4/2.5...
  • Page 114 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E...

  • Page 115: Index

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E INDEX 10/100 BASE-T Interface harddisk cable 100/10 Ethernet LAN harddisk connected application notes I/O map IDE interface Incompatibilities Input Signals interrupt 15H Battery Interrupt Controllers Battery connector BIOS BIOS CMOS BIOS History BIOS manual JTAG...
  • Page 116 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Remote Function Thermoscan ROM-BIOS RS-485 RTS Control Utility- connector Utility Connector Schematics Security serial interface cable Serial port VGA BIOS 47, 48 Serial Ports 30, 78 VGA Monitor SODIMM Speaker Special Function Interface Watchdog Specifications...
  • Page 117 TECHNICAL USER'S MANUAL FOR: PC/104 MSM586SEN/SEV (optional SN/SV) Nordstrasse 11/F CH- 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.com Homepage: http://www.digitallogic.com...
  • Page 118 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E COPYRIGHT © © © © 1999- 2004 BY DIGITAL-LOGIC AG No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, in any form or by any means, electronic, mechanical, optical, manual, or otherwise, without the prior written permis- sion of DIGITAL-LOGIC AG.
  • Page 119 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Table of Contents 1 Preface..........................6 Trademarks........................6 Disclaimer......................... 6 Environmental Protection Statement................6 Explanation of Symbols....................7 For Your Safety ........................ 9 Limited Two Year Warranty ................... 10 2 Overview........................11 Standard Features......................11 Unique Features ......................11 MSM586SEN/SEV block diagram ................
  • Page 120 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E EEPROM saved CMOS Setup ..................46 CORE / VGA - BIOS download function................ 47 5.6.1 CORE BIOS download function ....................47 5.6.2 VGA BIOS download function....................48 Memory ........................... 49 5.7.1 System Memory Map ......................... 49 5.7.2...
  • Page 121 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 17 Diagnostics .......................110 17.1 Failures and hints ..................... 110 17.1.1 Other, so far not identified problems..................110 17.2 POST-CODE Description ..................111 17.2.1 Boot Loader..........................111 17.2.2 Error Beep codes ........................111 17.2.3 System BIOS in Shadow RAM....................111 17.2.4...

  • Page 122: Preface

    DIGITAL-LOGIC AG reserves the right to revise this publication from time to time without obligation to notify any person of such revisions Environmental Protection Statement This product has been manufactured to satisfy environmental protection requirements where possible.

  • Page 123: Explanation Of Symbols

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Explanation of Symbols CE Conformity This symbol indicates that the product described in this manual is in compliance with all applied CE standards. Please refer also to the section “Applied Standards” in this manual. Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (>...
  • Page 124 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E This symbol and title warn of general hazards from mechanical, electrical, chemical failure. This may Endager your life/health and/or result in damage to your material.

  • Page 125: For Your Safety

    However, the life expectancy of your product can be drasti- cally reduced by improper treatment during unpacking and installation. Therefore, in the interest of your own safety and of the correct operation of your new Digital-Logic product, you are requested to conform with the following guidelines.

  • Page 126: Limited Two Year Warranty

    AG, Switzerland. This warranty is limited to the original purchaser of product and is not transferable. During the one year warranty period, DIGITAL-LOGIC AG will repair or replace, at its discretion, any defec- tive product or part at no additional charge, provided that the product is returned, shipping prepaid, to DIGITAL-LOGIC AG.

  • Page 127: Overview

    Floppy disk interface AT-IDE harddisk interface VGA/LCD video interface PC/104 embedded BUS Unique Features The MICROSPACE includes all standard PC/AT functions plus unique DIGITAL-LOGIC AG enhancements, such as: Single 5 volt supply LAN Ethernet 82559ER DOC2000 Compact card. typ 1...

  • Page 128: Msm586Sen/Sev Block Diagram

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E MSM586SEN/SEV block diagram JTAG Port ELAN520 DRAM SODIMM up to 128 Mbyte LiBAT PCI-BUS MAX2ll MAX2ll COM1 COM2 VRAM Ethernet 2 MB LCD/VGA Controller 69000 INTEL 82559ER LCD CRT 100/10BASE-T ISA-BUS DOC2000 Watchdog EEPROM EIDE...

  • Page 129: Specifications

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Specifications Specification CPU: AMD ELAN520 – 133MHz Compatibility: 8086 – Pentium 1. Level Cache: 16k data and 16k code 2. Level Cache: None Socket: Clock 133MHz 33MHz Powermanagement None FPU: Integrated Specification Chipset: Nordbridge AMD ELAN520...
  • Page 130 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Specification External Interface Videointerfaces CRT1, LCD for TFT and STN USB V1.1 Not available LPT1: Internal COM1: RS232 COM2: RS232 COM3: RS232 COM4: RS232 Keyboard: PS/2 Mouse: PS/2 Floppy: 26pin FCC Interface for TEAC Minifloppy Harddisk: 1 channel 44pin RM2.0mm ATAIDE-cable...
  • Page 131 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Specification EMI / EMC Tests If all signals are externaly filtered and assembled into a closed metalic case ! EMC emission EN61000-6-2:2001 Conducted disturbance EN55022 Class B Radiated disturbance EN55022 Class B EMC immunity EN61000-6-2...

  • Page 132: Bios History

    CAPABLE” means only that DIGITAL-LOGIC has verified that the product as a whole meet this definition when tested as a stand-alone product in a test lab, but dies not mean that DIGITAL-LOGIC has verified that the product is “YEAR 2000 CAPABLE” as used in your particular situation or configuration. DIGITAL-LOGIC makes no representation about individual components, including software, within the product should they be used independently from the product as a whole.

  • Page 133: Mechanical Dimensions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Mechanical Dimensions 2.7.1 Board version V2.2/2.3/2.4/2.5...

  • Page 134: Board Version V2.2/2.3/2.4/2.5

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 2.7.2 Board version V2.2/2.3/2.4/2.5...

  • Page 135: Incompatibilities To A Standard Pc/At

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Incompatibilities to a standard PC/AT A. Do not use internal COM1/2 of the ELAN520 in the FIFO-Mode. AMD Errata Some bits are lost in certain configurations of FIFO-Mode an in extended temperature ranges. Solution: Use the COM3/4 for FIFO Mode. Use a None-FIFO-Driver ! B.

  • Page 136: Thermoscan

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 2.11 Thermoscan With standard cooler:...

  • Page 137: High Frequency Radiation (To Meet En55022 & En61000)

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 2.12 High frequency radiation (to meet EN55022 & EN61000) Since the PC/104 CPU modules are very high integrated embedded computers, no peripheral lines are pro- tected against the radiation of high frequency spectrum. To meet a typical EN55022 requirement, all periph- erals, they are going outside of the computer case, must be filtered externaly.

  • Page 138: Pc/104 Bus Signals

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E PC/104 B IGNALS Please note, that may not all of the signals are available on this board (check chapter “Description of the connectors”) AEN, output Address Enable is used to degate the microprocessor and other devices from the I/O channel to allow DMA transfers to take place.
  • Page 139 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E /IOW, input/output I/O Write instructs an I/O device to read the data on the data bus. It may be driven by any microprocessor or DMA controller in the system. This signal is active low. IRQ[ 3 - 7, 9 - 12, 14, 15], input These signals are used to tell the microprocessor that an I/O device needs attention.
  • Page 140 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E SAO-SA19, LA17 - LA23 input/output Address bits 0 through 19 are used to address memory and I/0 devices within the system. These 20 address lines, allow access of up to 1MBytes of memory. SAO through SA19 are gated on the system bus when BALE is high and are latched on the falling edge of BALE.
  • Page 141 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E +/- 5% used only for the flatpanel supply. GROUND = 0V used for the entire system. VCC, +5V +/- 0.25V for logic and harddisk/floppy supply. For further Informations about PC/104 and PC/104plus, please refer to the PC/104 specification manual which is available on the internet.

  • Page 142: Bus Levels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Bus levels The bus currents are as follows: Output Signals: IOH: IOL: D0 - D16 8 mA 8 mA A0 - A23 8 mA 8 mA MR, MW, IOR, IOW, RES, ALE, AEN, C14 8 mA...

  • Page 143: Detailed System Description

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E ETAILED YSTEM ESCRIPTION This system has a system configuration based on the ISA architecture. Check the I/O and the memory map in this chapter. Power Requirements The power is connected through the PC/104 power connector; or the separate power connector on the board.
  • Page 144 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E MSM586SEV –30° C/+25° C/+85° C Current at +5Volt supply at Mode Memory DLAG-Nr. -30 ° C +25° C +85 ° C MSM586SEV (DLAG: 801360) [mA] [mA] [mA] 32MB/2 = 16 MB 890645 SDRAM 1290 1200 1200 DOSv6.22: A:\...

  • Page 145: Cpu, Boards And Rams

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CPU, Boards and RAMs 4.2.1 CPUs of this MICROSPACE Product Processor: Type: Clock: Landmark MHz: Landmark Units: ELAN520 133 MHz 4.2.2 Numeric Coprocessor Is integrated into the ELAN520. 4.2.3 DRAM Memory 70ns Speed: SDRAM SODIMM144...

  • Page 146: Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Interface 4.3.1 Keyboard AT compatible and PS/2 Mouse Signal Pin 1 Speaker out Pin 2 Pin 3 Ext. reset input Pin 4 Pin 5 Keyb. Data Pin 6 Keyb. Clock Pin 7 Pin 8 External battery 3.0V...
  • Page 147 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.3.1 RS485 remark 4.3.3.1.1 RS-485 RS-485 is a multi-drop extension to the RS-422 standard. It uses differential signals on twisted pairs for re- ceive and transmit. RS-485 systems can be half duplex 2-wire systems (one twisted pair plus signal common/ground) or full duplex 4-wire systems.
  • Page 148 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.3.1.3 If you are a software developer: It is a lot easier to get the RTS turn-off timing exact under MS-DOS than under Windows. Under MS-DOS, simply wait for both the TX-buffer-empty and all-sent UART flags to go true and then drop RTS. Under Win-...

  • Page 149: Floppy Disk Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.4 Floppy Disk Interface The onboard floppy disk controller and ROM-BIOS support one floppy disk drive in any of the standard PC- DOS and MS-DOS formats shown in the table . Supported Floppy Formats Capacity...

  • Page 150: Speaker Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.5 Speaker interface One of the board's CPU device provides the logic for a PC compatible speaker port. The speaker logic signal is buffered by a transistor amplifier, and provides approximately 0.1 watt of audio power to an external 8 ohm speaker.

  • Page 151: Controllers

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Controllers 4.4.1 Interrupt Controllers An 8259A compatible interrupt controller, within the ELAN520 chipset, provides seven prioritized interrupt levels. Some of these IRQ's are normally associated with the board's onboard device interfaces and control- lers, and several are available on the AT expansion bus.

  • Page 152: Internal Battery Backed Clock (Rtc)

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.5.2 Internal Battery backed clock (RTC) An AT compatible date/time clock is located within the chipset. The device also contains a CMOS static RAM, compatible with that in standard ATs. System configuration data is normally stored in the clock chip's CMOS RAM in a manner consistent with the convention used in other AT compatible computers.

  • Page 153: Watchdog

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.5.4 Watchdog The watchdog function is an implemented function of the ELAN520 and must be set/triggered by the • application The watchdog is hardware triggered and will be activated also in case of a hanging system •...

  • Page 154: Boottime

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Boottime Testenvironment for the powerconsumption measurement: Peripherie: Harddisk Hitachi Mod-DK23AA-60 DLAG: 890005 Monitor Compaq Mod-460 CompactFlash ONT-0515-0006 64MB DLAG: 890013 DOC2000 16 MB DLAG: PS/2-KB Logitech Mod-iTouch Keyboard PS/2-MS Logitech Mod-M-CAA43 Floppy TEAC Mod-FD-05HF Software: MS-DOS v6.22...

  • Page 155: Bios

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 5 BIOS More details are available in the separate BIOS manual on our CD and homepage ! ROM-BIOS sockets An EPROM socket with 8 Bit wide data access normally contains the board's AT compatible ROM-BIOS.

  • Page 156: Bios Cmos Setup

    On the next setup pages (switch with TAB) the values for special parameters are modifiable. Normally the parameters are set correctly by DIGITAL-LOGIC AG. Be very careful in modifying any parameter since the system could crash. Some parameters are dependent on the CPU type. The cache parameter is always available, for example.
  • Page 157 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Location Description Time of day (seconds) specified in BCD Alarm (seconds) specified in BCD Time of Day (minutes) specified in BCD Alarm (minutes) specified in BCD Time of Day (hours) specified in BCD Alarm (hours) specified in BCD...
  • Page 158 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description CMOS Location for Bad CMOS and Checksum Flags bit 7 = Flag for CMOS Lost Power Power OK Lost Power bit 6 = Flag for CMOS checksum bad Checksum is valid...
  • Page 159 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description Equipment bits 7-6 = Number of Diskette Drives One diskette drive Two diskette drives 10, 11 = Reserved bits 5-4 = Primary Display Type Adapter with option ROM CGA in 40 column mode...
  • Page 160 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description Reserved EMS Memory Size Low Byte EMS Memory Size High Byte 1Fh – Custom Drive Table 0 These 6 bytes (48 bits) contain the following data: Cylinders Landing Zone 10 bits...
  • Page 161 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description Byte 3 bits 7-6 = Reserved bits 5-0 = Upper 6 Bits of Write Precompensation Byte 4 bits 7-0 = Number of Heads Byte 5 bits 7-0 = Sectors Per Track...

  • Page 162: Eeprom Saved Cmos Setup

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E EEPROM saved CMOS Setup The EEPROM has different functions, as listed below: • Backup of the CMOS-Setup values. • Storing system informations like: version, production date, customisation of the board, CPU type. • Storing user/application values.

  • Page 163: Core / Vga - Bios Download Function

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CORE / VGA - BIOS download function Before downloading a BIOS, please check as follows: Make a MSDOS 6.22 bootable diskette including the following files: DELEP520.EXE Flash520.exe core BIOS (M520xxx.cor) lcd_file.000 IMPORTANT: Do not use boot disks created in a Windows operating system. If you do not have a MSDOS 6.22 disk avail- able, you can download a boot disk from www.bootdisk.com...

  • Page 164: Vga Bios Download Function

    The previously loaded VGA- BIOS is not corresponding 100% or works only on the LCD properly. If the screen is dark after the reboot of the system: A new system BIOS must be programmed. Ask DIGITAL-LOGIC AG for the binary file. If the previous version is still programmed: Switch off the board and do not make a warm boot due to the fact that the data may are still stored in the memory shadow.

  • Page 165: Memory

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 5.7.1 System Memory Map The ELAN520 CPU used as central processing unit on the MICROSPACE has a memory address space which is defined by 32 address bits. Therefore, it can address 1 GByte of memory. The memory address...
  • Page 166 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0008h DMA channel 0-3 command register bit 7 = DACK sense active high/low high bit 6 = DREQ sense active high/low high bit 5 = Write selection Late write selection...
  • Page 167 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 000Ch DMA clear byte pointer flip/flop 000Dh DMA read temporary register 000Dh DMA master clear 000Eh DMA clear mask register 000Fh DMA write mask register 0020h Programmable Interrupt Controller -...
  • Page 168 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0021h R / W PIC master interrupt mask register (OCW1) bit 7 Enable parallel printer interrupt bit 6 Enable diskette interrupt bit 5 Enable hard disk interrupt bit 4...
  • Page 169 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0022h R / W Chipsset Register Adress 0023h R / W Chipsset Register Data 0040h R / W Programmable Interrupt Time read/write counter 0, key- board controller channel 0...
  • Page 170 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0064h Keyboard controller read status bit 7 No parity error Parity error on keyboard transmission bit 6 No timeout Received timeout bit 5 No timeout Keyboard transmission timeout bit 4...
  • Page 171 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 00A0h - 00A1h are reserved for the slave programmable interrupt controller. The bit definitions are identical to those of addresses 0020h - 0021h except where indicated. 00A0h R / W...
  • Page 172 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 00D2h Write request register for DMA channels 4-7 00D4h Write single mask register bit for DMA channels 4-7 bits 7-3 = 0 Reserved bit 2 Clear mask bit, 1 Set mask bit...
  • Page 173 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0173h R / W Sector number for hard disk 1 0174h R / W Number of cylinders (low byte) for hard drive 1 0175h R / W Number of cylinders (high byte) for hard drive 1...
  • Page 174 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 01F6h R / W Drive/Head register for hard drive 0 bit 7 bit 6 bit 5 bit 4 = Drive select First hard drive Second hard drive bits 3-0 = Head select bits...
  • Page 175 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status I/O addresses 02F8h - 02FFh are reserved for use with serial port 2. See the bit defini- tions for I/O addresses 03F8h - 03FFh. 02F8h Transmitter holding register for serial port 2...
  • Page 176 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 037Ah R / W Control port for parallel port 1 bits 7-5 = Reserved bit 4 Enable IRQ bit 3 Select printer bit 2 Initialize printer bit 1 Automatic line feed...
  • Page 177 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 03F4h Status register for primary diskette drive controller bit 7 Data register is ready bit 6 Transfer from system to controller Transfer from controller to system bit 5 Non-DMA mode...
  • Page 178 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 03F8h R / W Baud rate divisor (low byte) - This byte along with the high byte (03F9h) store the data transmission rate divisor. bits 7-0 = Data bits 0-7 when the Divisor Latch Access...
  • Page 179 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 03FDh Line status register - serial port 1 bit 7 = Reserved bit 6 Transmitting shift and holding registers empty bit 5 Transmitter shift register empty bit 4 Break interrupt...

  • Page 180: Bios Data Area Definitions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions The BIOS Data Area is an area within system RAM that contains information about the system envi- ronment. System environment information includes definitions associated with hard disks, diskette drives, keyboard, video, as well as other BIOS functions. This area is created when the system is first powered on.
  • Page 181 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 15h - 16h Reserved Keyboard Shift Qualifier States bit 7 = Insert mode bit 6 = CAPS lock bit 5 = Numlock bit 4 = Scroll Lock bit 3...
  • Page 182 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description Diskette Drive Motor Status bit 7 = Current operation Write or Format Read or Verify bit 6 = Reserved bits 5-4 = Drive Select Drive A Drive B...
  • Page 183 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 50h - 5Fh Position of cursor for each video page. Current cursor po- sition is stored two bytes per page. First byte specifies the column, the second byte specifies the row.
  • Page 184 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 78h - 7Bh Default parallel port timeout values 7Dh - 7Fh Default serial port timeout values 80h - 81h Pointer to start of keyboard buffer 82h - 83h...
  • Page 185 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 92h - 93h Scratch area for diskette media. Low byte for drive A, high byte for drive B. 94h - 95h Current track number for both drives. Low byte for drive A, high byte for drive B.

  • Page 186: Compatibility Service Table

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 5.8.1 Compatibility Service Table In order to ensure compatibility with industry-standard memory locations for interrupt service routines and miscellaneous tabular data, the BIOS maintains tables and jump vectors. Location Description FE05Bh Entry Point for POST...

  • Page 187: Vga, Lcd

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 6 VGA, LCD VGA / LCD controller 69000 69000 High Performance Flat Panel / CRT HiQVideo Accelerator with Integrated Memory • Highly integrated Flat Panel and CRT GUI Accelerator & Multimedia Engine, Palette/DAC, Clock Synthe- sizer, and integrated frame buffer •...

  • Page 188: Display Modes Supported

    3.3V but can tolerate 5V operation. Software Compatibility / Flexibility The 69000 is fully compatible with the VGA standard at both the register and BIOS levels. DIGITAL-LOGIC supply a fully VGA compatible BIOS, end-user utilities and drivers for common application programs.

  • Page 189: Vga/Lcd Bios Support

    FOR A NEW LCD TYPE, NOT AVAILABLE NOW: If the LCD BIOS for your LCD is not available, DIGITAL-LOGIC will adapt the LCD and provide you with one working cable. To initialise this, we need the following points from you:...

  • Page 190: Memory 69000 Crt/Tft Panels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 69000 CRT/TFT panels Hor. Vert. Color Refr. DCLK Cursor FB/C FB/M Video Total Total Resol. Resol. kByte kByte kByte kByte Input with kByte Video Video 25.175 31.500 31.500 36.000 25.175 31.500 31.500 36.000 25.175 1204 31.500...

  • Page 191: Memory 69000 Color Stn-Dd Panels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 69000 color STN-DD panels Hor. Vert. Color Refr. DCLK Cursor FB/C FB/M Video Total Total Resol. Resol. kByte kByte kByte kByte Input with kByte Video Video 25.175 31.500 31.500 36.000 25.175 1024 31.500 1024 31.500...

  • Page 192: Memory 69000 Mono Stn-Dd Panels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 69000 Mono STN-DD panels Hor. Vert. Color Refr. DCLK Cursor FB/C FB/M Video Total Total Resol. Resol. kByte kByte kByte kByte Input with kByte Video Video 25.175 31.500 31.500 36.000 25.175 31.500 31.500 36.000 25.175...

  • Page 193: Description Of The Connectors

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E ESCRIPTION OF THE CONNECTORS Flat cable 44pin IDE is: IDT Terminal for Dual Row (2.00mm grid) and 1.00mm flat cable • All others are: IDT Terminal for Dual Row 0.1" (2.54mm grid) and 1.27mm flat cable •...
  • Page 194 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Serial Port COM1 (from ELAN520) Header onboard: RS232 Signal RS485 Signal * D-SUB connector: Pin 1 = DCD Pin 1 Pin 2 = DSR Pin 6 Pin 3 = RxD Pin 2 Pin 4 = RTS...
  • Page 195 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Floppy Disk Interface- connector (MOLEX 26pin FCC) FD26: Signal Name Function in/out +5 volts Index Pulse +5 volts Drive Select 2 +5 volts DCHG Disk Change Motor On 2 DIRC Direction Select STEP Step Write Data...
  • Page 196 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Printerport (Centronics) The printer connector provides an interface for 8 Bit centronics printers. Header onboard: D-SUB connector: Signal Pin 1 Pin 1 = Strobe Pin 3 Pin 2 = Data 0 Pin 5 Pin 3...
  • Page 197 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E The Utility connector must be wired to a standard AT-female connector: Frontside AT-Keyboard (female) Solderside AT-Keyboard (female) Data (2) Data (2) Ground (4) VCC (5) VCC (5) Ground (4) Clock (1) Clock (1) PS/2 Frontside (female)
  • Page 198 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E LCD connector VGA-LCD Interface (flatpanel signals): Signals P20-P23 are located on the J7M connector Signal Signal M / DE Signal Line Pulse LP VCC-LCD (1A), Selected by J51 VEESAVE (5V/1A) Shift Clock VBACKSAVE (12V/1A) Contrast resistor pin 1 *)
  • Page 199 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E VGA Monitor (CRT-Signals) J7 L/M Header 15 pins HiDensity D-SUB 40 Pin -L 10 Pin -M Signal Signal Pin 32 Pin 2 VGA red Pin 1 Pin 34 Pin 4 VGA green Pin 2 Green...
  • Page 200 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E LAN LED Signal Remarks LILEDX / Link LED 330 Ohm resistor on board VCC3 ACTLEDX / Activity LED 330 Ohm resistor on board JTAG connector (debugging) Signal Signal CMDACK BREAK STOP TRACE TRST RESETIN Spare connector (not assembled), for test purposes only...
  • Page 201 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E PC/104 BUS interface Ground Ground (IOCHCK) NC Ground SBHE MEMCS16 RESET LA23 IOCS16 (+5V) NC LA22 IRQ10 IRQ9 LA21 IRQ11 LA20 IRQ12 DRQ2 LA19 IRQ15 (-12V) NC LA18 IRQ14 (0WS) NC LA17 DACK0 +12V MEMR...
  • Page 202 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Battery connector Signal Pin 1 Battery 3.6V Pin 2 Ground U112 DOC 2000 IC- socket Signal Signal Compact card holder, typ1 Signal Pin 01 = GND Pin 02 = D3 Pin 03 = D4 Pin 04...
  • Page 203 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Signal Pin 28 = D12 Pin 29 = D13 Pin 30 = D14 Pin 31 = D15 Pin 32 = CS1 (active low) Pin 33 = (Vs1) NC Pin 34 = IOR (active low) Pin 35...
  • Page 204 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E SODIMM (Small Outline- Dual Inline Memory Module), 144pins Normal Description Normal Description Ground Ground Not connected Data 0 Ground DQ32 Data 32 Ground Data 1 DQ33 Data 33 Data 2 DQ34 Data 34 Data 3...
  • Page 205 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Normal Description Normal Description +5 VDC +5 VDC DQ28 Data 28 DQ60 Data 60 Don't use DQ29 Data 29 Don't use DQ61 Data 61 +5 VDC DQ30 Data 30 +5 VDC DQ62 Data 62 Don't use...

  • Page 206: Jumper Locations On The Board

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E UMPER LOCATIONS ON THE BOARD Jumper locations on the board The figure shows the location of all jumper blocks on the MSM586SEN/SEV board. The numbers shown in this figure are silk screened on the board so that the pins can easily be located. This chapter refers to the individual pin for these jumpers.

  • Page 207: Jumpers Locations On The Msm586Sen/Sev V2.2/2.3/2.3A/2.4/2.5

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Jumpers locations on the MSM586SEN/SEV V2.2/2.3/2.3a/2.4/2.5 Top side: Remark: The connectors J49/50 of the old Version V2.1. were not at the same position, as above defined. There were closer placed.
  • Page 208 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Bottom side:...

  • Page 209: Led Criterions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 9 LED CRITERIONS Color Function green Primary HDD green LAN linked green LAN active green LAN speed...

  • Page 210: Cable Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E ABLE INTERFACE 10.1 The harddisk cable 44pin IDT Terminal for Dual Row (2.00 mm grid) and 1.00 mm flat cable. 44 pins = 40 pins signal and 4 pins power. Max. length for the IDE cable is 30 cm.

  • Page 211: The Com 1/2/3/4 Serial Interface Cable

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 10.2 The COM 1/2/3/4 serial interface cable DT terminal for dual row 0.1" (2.54 mm grid) and 1.27 mm flat cable. Line of pin 1 COM1 9pin D-Sub male COM1/2 ATTENTION: Do not short-circuit these signal lines.

  • Page 212: The Printer Interface Cable (P1)

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 10.3 The printer interface cable (P1) IDT terminal for dual row 0.1" (2.54mm grid) and 1.27 mm flat cable Parallelport Cable LPT1 ATTENTION: Maximum length of this cable is 6 meters. Prevent short-circuits. Never apply power to these signals, the MICROSPACE MSM586SEV will be destroyed.

  • Page 213: The Micro Floppy Interface Cable

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 10.4 The Micro Floppy interface cable...

  • Page 214: Remote Function

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 11 R EMOTE UNCTION Remote works only with the COM 1 port on the MSM586SEN/SEV. BIOS default settings are normally as follows: Internal ELAN A COM 1 Internal ELAN B NONE SUPER I/O C NONE...

  • Page 215: Remote Enabler

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E When video redirection is enabled (option NOVIDEO not active), the BIOS will skip the initialization of both ISA and PCI VGA cards. The BIOS thereby comes up much quicker. Using the keyword DUALVIDEO will enable possible VGA cards as well and display video output on both the real video card and on the remote machine.

  • Page 216: Restrictions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Optional: The wiring of the parallel DOS/Link-Cable (DSUB 25pin) is as follows: PC1 (Host) PC2 (Target) Signal Name DSUB-Pin Number DSUB-Pin Number Signal Name ERROR# − − SLCT − − − − ACK# − −...

  • Page 217: 100/10 Ethernet Lan

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 100/10 E THERNET Required programs and drivers are located on our CD in the directory x:\DRIVERS\NETWORK\INTEL\ 13.1 Intel 82559ER Ethernet chip Create a directory C:\network on your harddisk. Copy the programs and drivers of x:\DRIVERS\NETWORK\INTEL\82559ER\ onto your HD.

  • Page 218: Driver Installation Windows 95

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 13.1.2 Driver installation WINDOWS 95 Copy Intel Pro100+ driver on HD (x:\drivers\network\intel\82559ER). De-install all networkdrivers under Windows95 in system and software folders and restart Windows. Networkcard Pro10 PCI will be auto-detected and all drivers can be installed (of the copied directory).

  • Page 219: Intel 82559 Ethernet Chip

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 13.2 Intel 82559 Ethernet chip Create a directory C:\LAN100 on your harddisk. Copy the programs and drivers of x:\DRIVERS\NETWORK\INTEL\82559\ onto your HD. 13.2.1 Installation example for MSDOS Novell 4.11 run “setup.exe” in the directory c:\lan100\...

  • Page 220: Eeprom Update

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 13.2.4 EEPROM update Do not use this function, if the EEPROM is not corrupted ! To download the data into the EEPROM, make the following steps: start MSDOS change into the directory: c:\lan100\utility\e2prom\... type the following string: eeupdate –all lan100.eep lan100.dat...

  • Page 221: Installing The Flashdisk Doc2000

    DOC2000 NSTALLING THE FLASHDISK On the SSD 36pin socket a DiskOnChip DOC2000 module from M-Systems may be installed. This device is also available at DIGITAL-LOGIC AG. Operating Systems: DOS, DL-DOS, RTX-DOS, WIN 3.11, ROM-WIN are working with these drives. All other non DOS compatible systems need a driver.

  • Page 222: Special Peripherals, Configuration

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E PECIAL ERIPHERALS ONFIGURATION 15.1 The special function interface for MICROSPACE computers SFI All functions are performed by starting the SW-interrupt 15hex with the following arguments: Function: WRITE TO EEPROM Number: Writes the Data byte into the addressed User-Memory-Cell from Description: the serial EEPROM.
  • Page 223 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Function: WRITE PRODUCTION DATE & RESET DLAG-COUNTERS Number: Writes the production date into the addressed DLAG-Memory- Cell from the serial EEPROM. The old value is automatically de- Description: leted. If the Password is also in DX, the counters will be resettet...
  • Page 224 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Function: READ INFO 2 FROM EEPROM Number: Reads the information bytes out of the serial EEPROM Description: DLAG Int15 function Input values: Function request Board Type BOARD TYPE ('M'=PC/104, 'E'=Euro, 'W'=MSWS, Output values: 'S'=Slot, 'C'=Custom, 'X'= smartCore or smartModule CPU Type bits 1…7 and board type bits 8…15 (CPU type:...

  • Page 225: Starting Up The System

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E UILDING A SYSTEM To build up a system based on your board, you should prepare the following equipments: A stable power supply of 5V (> 3 ampères), depending on the cpu, memory, etc. Assemble CPU with the proper clk- settings and cooling (fan) depending on board.

  • Page 226: Diagnostics

    Connect a floppy: does the bezel LED light blink? Does the harddisk spindle motor start? Reset the CMOS-RAM C. If the error appears again Contact your nearest DIGITAL-LOGIC distributor for Technical Support. Or fill out the support request form (SRF) on the Internet: http://www.digitallogic.com / Support...

  • Page 227: Post-Code Description

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 17.2 POST-CODE Description More details are available in the separate BIOS manual on our CD and homepage ! 17.2.1 Boot Loader DIAG_SYSTEM_INIT Boot started DIAG_A20_DISABLE Disable A20 through A20 DIAG_INIT_CHIPSET Initialize CS DIAG_TEST_RAM Test RAM...

  • Page 228: Error Beep Codes

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E DEBUG_RAM_SIZE_DONE RAM test completed DEBUG_RAM_PROT_EXIT Protected mode exit successful DEBUG_CS_SHADOW_SETUP Setup Shadow DEBUG_VIDEO_EQUIP_INIT_INIT Going To Initialize Video DEBUG_VIDEO_BW_SEARCH Search For Monochrome Adapter DEBUG_VIDEO_COLOR_SEARCH Search For Color Adapter DEBUG_VIDEO_SIGNON Signon messages displayed DEBUG_OEM_CONFIG_KBD_CTL special init of keyboard ctlr...

  • Page 229: Assemblings View

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 18 A SSEMBLINGS VIEW 18.1 MSM586SV/SN – SEV/SEN V2.3a/2.4/2.5...
  • Page 230 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E...

  • Page 231: Index

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E INDEX 10/100 BASE-T Interface harddisk cable 100/10 Ethernet LAN harddisk connected application notes I/O map IDE interface Incompatibilities Input Signals interrupt 15H Battery Interrupt Controllers Battery connector BIOS BIOS CMOS BIOS History BIOS manual JTAG...
  • Page 232 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Remote Function Thermoscan ROM-BIOS RS-485 RTS Control Utility- connector Utility Connector Schematics Security serial interface cable Serial port VGA BIOS 47, 48 Serial Ports 30, 78 VGA Monitor SODIMM Speaker Special Function Interface Watchdog Specifications...
  • Page 233 TECHNICAL USER'S MANUAL FOR: PC/104 MSM586SEN/SEV (optional SN/SV) Nordstrasse 11/F CH- 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.com Homepage: http://www.digitallogic.com...
  • Page 234 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E COPYRIGHT © © © © 1999- 2004 BY DIGITAL-LOGIC AG No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, in any form or by any means, electronic, mechanical, optical, manual, or otherwise, without the prior written permis- sion of DIGITAL-LOGIC AG.
  • Page 235 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Table of Contents 1 Preface..........................6 Trademarks........................6 Disclaimer......................... 6 Environmental Protection Statement................6 Explanation of Symbols....................7 For Your Safety ........................ 9 Limited Two Year Warranty ................... 10 2 Overview........................11 Standard Features......................11 Unique Features ......................11 MSM586SEN/SEV block diagram ................
  • Page 236 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E EEPROM saved CMOS Setup ..................46 CORE / VGA - BIOS download function................ 47 5.6.1 CORE BIOS download function ....................47 5.6.2 VGA BIOS download function....................48 Memory ........................... 49 5.7.1 System Memory Map ......................... 49 5.7.2...
  • Page 237 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 17 Diagnostics .......................110 17.1 Failures and hints ..................... 110 17.1.1 Other, so far not identified problems..................110 17.2 POST-CODE Description ..................111 17.2.1 Boot Loader..........................111 17.2.2 Error Beep codes ........................111 17.2.3 System BIOS in Shadow RAM....................111 17.2.4...

  • Page 238: Preface

    DIGITAL-LOGIC AG reserves the right to revise this publication from time to time without obligation to notify any person of such revisions Environmental Protection Statement This product has been manufactured to satisfy environmental protection requirements where possible.

  • Page 239: Explanation Of Symbols

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Explanation of Symbols CE Conformity This symbol indicates that the product described in this manual is in compliance with all applied CE standards. Please refer also to the section “Applied Standards” in this manual. Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (>...
  • Page 240 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E This symbol and title warn of general hazards from mechanical, electrical, chemical failure. This may Endager your life/health and/or result in damage to your material.

  • Page 241: For Your Safety

    However, the life expectancy of your product can be drasti- cally reduced by improper treatment during unpacking and installation. Therefore, in the interest of your own safety and of the correct operation of your new Digital-Logic product, you are requested to conform with the following guidelines.

  • Page 242: Limited Two Year Warranty

    AG, Switzerland. This warranty is limited to the original purchaser of product and is not transferable. During the one year warranty period, DIGITAL-LOGIC AG will repair or replace, at its discretion, any defec- tive product or part at no additional charge, provided that the product is returned, shipping prepaid, to DIGITAL-LOGIC AG.

  • Page 243: Overview

    Floppy disk interface AT-IDE harddisk interface VGA/LCD video interface PC/104 embedded BUS Unique Features The MICROSPACE includes all standard PC/AT functions plus unique DIGITAL-LOGIC AG enhancements, such as: Single 5 volt supply LAN Ethernet 82559ER DOC2000 Compact card. typ 1...

  • Page 244: Msm586Sen/Sev Block Diagram

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E MSM586SEN/SEV block diagram JTAG Port ELAN520 DRAM SODIMM up to 128 Mbyte LiBAT PCI-BUS MAX2ll MAX2ll COM1 COM2 VRAM Ethernet 2 MB LCD/VGA Controller 69000 INTEL 82559ER LCD CRT 100/10BASE-T ISA-BUS DOC2000 Watchdog EEPROM EIDE...

  • Page 245: Specifications

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Specifications Specification CPU: AMD ELAN520 – 133MHz Compatibility: 8086 – Pentium 1. Level Cache: 16k data and 16k code 2. Level Cache: None Socket: Clock 133MHz 33MHz Powermanagement None FPU: Integrated Specification Chipset: Nordbridge AMD ELAN520...
  • Page 246 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Specification External Interface Videointerfaces CRT1, LCD for TFT and STN USB V1.1 Not available LPT1: Internal COM1: RS232 COM2: RS232 COM3: RS232 COM4: RS232 Keyboard: PS/2 Mouse: PS/2 Floppy: 26pin FCC Interface for TEAC Minifloppy Harddisk: 1 channel 44pin RM2.0mm ATAIDE-cable...
  • Page 247 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Specification EMI / EMC Tests If all signals are externaly filtered and assembled into a closed metalic case ! EMC emission EN61000-6-2:2001 Conducted disturbance EN55022 Class B Radiated disturbance EN55022 Class B EMC immunity EN61000-6-2...

  • Page 248: Bios History

    CAPABLE” means only that DIGITAL-LOGIC has verified that the product as a whole meet this definition when tested as a stand-alone product in a test lab, but dies not mean that DIGITAL-LOGIC has verified that the product is “YEAR 2000 CAPABLE” as used in your particular situation or configuration. DIGITAL-LOGIC makes no representation about individual components, including software, within the product should they be used independently from the product as a whole.

  • Page 249: Mechanical Dimensions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Mechanical Dimensions 2.7.1 Board version V2.2/2.3/2.4/2.5...

  • Page 250: Board Version V2.2/2.3/2.4/2.5

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 2.7.2 Board version V2.2/2.3/2.4/2.5...

  • Page 251: Incompatibilities To A Standard Pc/At

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Incompatibilities to a standard PC/AT A. Do not use internal COM1/2 of the ELAN520 in the FIFO-Mode. AMD Errata Some bits are lost in certain configurations of FIFO-Mode an in extended temperature ranges. Solution: Use the COM3/4 for FIFO Mode. Use a None-FIFO-Driver ! B.

  • Page 252: Thermoscan

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 2.11 Thermoscan With standard cooler:...

  • Page 253: High Frequency Radiation (To Meet En55022 & En61000)

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 2.12 High frequency radiation (to meet EN55022 & EN61000) Since the PC/104 CPU modules are very high integrated embedded computers, no peripheral lines are pro- tected against the radiation of high frequency spectrum. To meet a typical EN55022 requirement, all periph- erals, they are going outside of the computer case, must be filtered externaly.

  • Page 254: Pc/104 Bus Signals

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E PC/104 B IGNALS Please note, that may not all of the signals are available on this board (check chapter “Description of the connectors”) AEN, output Address Enable is used to degate the microprocessor and other devices from the I/O channel to allow DMA transfers to take place.
  • Page 255 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E /IOW, input/output I/O Write instructs an I/O device to read the data on the data bus. It may be driven by any microprocessor or DMA controller in the system. This signal is active low. IRQ[ 3 - 7, 9 - 12, 14, 15], input These signals are used to tell the microprocessor that an I/O device needs attention.
  • Page 256 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E SAO-SA19, LA17 - LA23 input/output Address bits 0 through 19 are used to address memory and I/0 devices within the system. These 20 address lines, allow access of up to 1MBytes of memory. SAO through SA19 are gated on the system bus when BALE is high and are latched on the falling edge of BALE.
  • Page 257 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E +/- 5% used only for the flatpanel supply. GROUND = 0V used for the entire system. VCC, +5V +/- 0.25V for logic and harddisk/floppy supply. For further Informations about PC/104 and PC/104plus, please refer to the PC/104 specification manual which is available on the internet.

  • Page 258: Bus Levels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Bus levels The bus currents are as follows: Output Signals: IOH: IOL: D0 - D16 8 mA 8 mA A0 - A23 8 mA 8 mA MR, MW, IOR, IOW, RES, ALE, AEN, C14 8 mA...

  • Page 259: Detailed System Description

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E ETAILED YSTEM ESCRIPTION This system has a system configuration based on the ISA architecture. Check the I/O and the memory map in this chapter. Power Requirements The power is connected through the PC/104 power connector; or the separate power connector on the board.
  • Page 260 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E MSM586SEV –30° C/+25° C/+85° C Current at +5Volt supply at Mode Memory DLAG-Nr. -30 ° C +25° C +85 ° C MSM586SEV (DLAG: 801360) [mA] [mA] [mA] 32MB/2 = 16 MB 890645 SDRAM 1290 1200 1200 DOSv6.22: A:\...

  • Page 261: Cpu, Boards And Rams

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CPU, Boards and RAMs 4.2.1 CPUs of this MICROSPACE Product Processor: Type: Clock: Landmark MHz: Landmark Units: ELAN520 133 MHz 4.2.2 Numeric Coprocessor Is integrated into the ELAN520. 4.2.3 DRAM Memory 70ns Speed: SDRAM SODIMM144...

  • Page 262: Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Interface 4.3.1 Keyboard AT compatible and PS/2 Mouse Signal Pin 1 Speaker out Pin 2 Pin 3 Ext. reset input Pin 4 Pin 5 Keyb. Data Pin 6 Keyb. Clock Pin 7 Pin 8 External battery 3.0V...
  • Page 263 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.3.1 RS485 remark 4.3.3.1.1 RS-485 RS-485 is a multi-drop extension to the RS-422 standard. It uses differential signals on twisted pairs for re- ceive and transmit. RS-485 systems can be half duplex 2-wire systems (one twisted pair plus signal common/ground) or full duplex 4-wire systems.
  • Page 264 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.3.1.3 If you are a software developer: It is a lot easier to get the RTS turn-off timing exact under MS-DOS than under Windows. Under MS-DOS, simply wait for both the TX-buffer-empty and all-sent UART flags to go true and then drop RTS. Under Win-...

  • Page 265: Floppy Disk Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.4 Floppy Disk Interface The onboard floppy disk controller and ROM-BIOS support one floppy disk drive in any of the standard PC- DOS and MS-DOS formats shown in the table . Supported Floppy Formats Capacity...

  • Page 266: Speaker Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.3.5 Speaker interface One of the board's CPU device provides the logic for a PC compatible speaker port. The speaker logic signal is buffered by a transistor amplifier, and provides approximately 0.1 watt of audio power to an external 8 ohm speaker.

  • Page 267: Controllers

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Controllers 4.4.1 Interrupt Controllers An 8259A compatible interrupt controller, within the ELAN520 chipset, provides seven prioritized interrupt levels. Some of these IRQ's are normally associated with the board's onboard device interfaces and control- lers, and several are available on the AT expansion bus.

  • Page 268: Internal Battery Backed Clock (Rtc)

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.5.2 Internal Battery backed clock (RTC) An AT compatible date/time clock is located within the chipset. The device also contains a CMOS static RAM, compatible with that in standard ATs. System configuration data is normally stored in the clock chip's CMOS RAM in a manner consistent with the convention used in other AT compatible computers.

  • Page 269: Watchdog

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 4.5.4 Watchdog The watchdog function is an implemented function of the ELAN520 and must be set/triggered by the • application The watchdog is hardware triggered and will be activated also in case of a hanging system •...

  • Page 270: Boottime

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Boottime Testenvironment for the powerconsumption measurement: Peripherie: Harddisk Hitachi Mod-DK23AA-60 DLAG: 890005 Monitor Compaq Mod-460 CompactFlash ONT-0515-0006 64MB DLAG: 890013 DOC2000 16 MB DLAG: PS/2-KB Logitech Mod-iTouch Keyboard PS/2-MS Logitech Mod-M-CAA43 Floppy TEAC Mod-FD-05HF Software: MS-DOS v6.22...

  • Page 271: Bios

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 5 BIOS More details are available in the separate BIOS manual on our CD and homepage ! ROM-BIOS sockets An EPROM socket with 8 Bit wide data access normally contains the board's AT compatible ROM-BIOS.

  • Page 272: Bios Cmos Setup

    On the next setup pages (switch with TAB) the values for special parameters are modifiable. Normally the parameters are set correctly by DIGITAL-LOGIC AG. Be very careful in modifying any parameter since the system could crash. Some parameters are dependent on the CPU type. The cache parameter is always available, for example.
  • Page 273 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Location Description Time of day (seconds) specified in BCD Alarm (seconds) specified in BCD Time of Day (minutes) specified in BCD Alarm (minutes) specified in BCD Time of Day (hours) specified in BCD Alarm (hours) specified in BCD...
  • Page 274 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description CMOS Location for Bad CMOS and Checksum Flags bit 7 = Flag for CMOS Lost Power Power OK Lost Power bit 6 = Flag for CMOS checksum bad Checksum is valid...
  • Page 275 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description Equipment bits 7-6 = Number of Diskette Drives One diskette drive Two diskette drives 10, 11 = Reserved bits 5-4 = Primary Display Type Adapter with option ROM CGA in 40 column mode...
  • Page 276 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description Reserved EMS Memory Size Low Byte EMS Memory Size High Byte 1Fh – Custom Drive Table 0 These 6 bytes (48 bits) contain the following data: Cylinders Landing Zone 10 bits...
  • Page 277 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CMOS Map Continued... Location Description Byte 3 bits 7-6 = Reserved bits 5-0 = Upper 6 Bits of Write Precompensation Byte 4 bits 7-0 = Number of Heads Byte 5 bits 7-0 = Sectors Per Track...

  • Page 278: Eeprom Saved Cmos Setup

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E EEPROM saved CMOS Setup The EEPROM has different functions, as listed below: • Backup of the CMOS-Setup values. • Storing system informations like: version, production date, customisation of the board, CPU type. • Storing user/application values.

  • Page 279: Core / Vga - Bios Download Function

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E CORE / VGA - BIOS download function Before downloading a BIOS, please check as follows: Make a MSDOS 6.22 bootable diskette including the following files: DELEP520.EXE Flash520.exe core BIOS (M520xxx.cor) lcd_file.000 IMPORTANT: Do not use boot disks created in a Windows operating system. If you do not have a MSDOS 6.22 disk avail- able, you can download a boot disk from www.bootdisk.com...

  • Page 280: Vga Bios Download Function

    The previously loaded VGA- BIOS is not corresponding 100% or works only on the LCD properly. If the screen is dark after the reboot of the system: A new system BIOS must be programmed. Ask DIGITAL-LOGIC AG for the binary file. If the previous version is still programmed: Switch off the board and do not make a warm boot due to the fact that the data may are still stored in the memory shadow.

  • Page 281: Memory

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 5.7.1 System Memory Map The ELAN520 CPU used as central processing unit on the MICROSPACE has a memory address space which is defined by 32 address bits. Therefore, it can address 1 GByte of memory. The memory address...
  • Page 282 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0008h DMA channel 0-3 command register bit 7 = DACK sense active high/low high bit 6 = DREQ sense active high/low high bit 5 = Write selection Late write selection...
  • Page 283 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 000Ch DMA clear byte pointer flip/flop 000Dh DMA read temporary register 000Dh DMA master clear 000Eh DMA clear mask register 000Fh DMA write mask register 0020h Programmable Interrupt Controller -...
  • Page 284 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0021h R / W PIC master interrupt mask register (OCW1) bit 7 Enable parallel printer interrupt bit 6 Enable diskette interrupt bit 5 Enable hard disk interrupt bit 4...
  • Page 285 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0022h R / W Chipsset Register Adress 0023h R / W Chipsset Register Data 0040h R / W Programmable Interrupt Time read/write counter 0, key- board controller channel 0...
  • Page 286 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0064h Keyboard controller read status bit 7 No parity error Parity error on keyboard transmission bit 6 No timeout Received timeout bit 5 No timeout Keyboard transmission timeout bit 4...
  • Page 287 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 00A0h - 00A1h are reserved for the slave programmable interrupt controller. The bit definitions are identical to those of addresses 0020h - 0021h except where indicated. 00A0h R / W...
  • Page 288 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 00D2h Write request register for DMA channels 4-7 00D4h Write single mask register bit for DMA channels 4-7 bits 7-3 = 0 Reserved bit 2 Clear mask bit, 1 Set mask bit...
  • Page 289 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 0173h R / W Sector number for hard disk 1 0174h R / W Number of cylinders (low byte) for hard drive 1 0175h R / W Number of cylinders (high byte) for hard drive 1...
  • Page 290 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 01F6h R / W Drive/Head register for hard drive 0 bit 7 bit 6 bit 5 bit 4 = Drive select First hard drive Second hard drive bits 3-0 = Head select bits...
  • Page 291 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status I/O addresses 02F8h - 02FFh are reserved for use with serial port 2. See the bit defini- tions for I/O addresses 03F8h - 03FFh. 02F8h Transmitter holding register for serial port 2...
  • Page 292 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 037Ah R / W Control port for parallel port 1 bits 7-5 = Reserved bit 4 Enable IRQ bit 3 Select printer bit 2 Initialize printer bit 1 Automatic line feed...
  • Page 293 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 03F4h Status register for primary diskette drive controller bit 7 Data register is ready bit 6 Transfer from system to controller Transfer from controller to system bit 5 Non-DMA mode...
  • Page 294 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 03F8h R / W Baud rate divisor (low byte) - This byte along with the high byte (03F9h) store the data transmission rate divisor. bits 7-0 = Data bits 0-7 when the Divisor Latch Access...
  • Page 295 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E I/O Ad- Read/Write Description dress Status 03FDh Line status register - serial port 1 bit 7 = Reserved bit 6 Transmitting shift and holding registers empty bit 5 Transmitter shift register empty bit 4 Break interrupt...

  • Page 296: Bios Data Area Definitions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions The BIOS Data Area is an area within system RAM that contains information about the system envi- ronment. System environment information includes definitions associated with hard disks, diskette drives, keyboard, video, as well as other BIOS functions. This area is created when the system is first powered on.
  • Page 297 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 15h - 16h Reserved Keyboard Shift Qualifier States bit 7 = Insert mode bit 6 = CAPS lock bit 5 = Numlock bit 4 = Scroll Lock bit 3...
  • Page 298 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description Diskette Drive Motor Status bit 7 = Current operation Write or Format Read or Verify bit 6 = Reserved bits 5-4 = Drive Select Drive A Drive B...
  • Page 299 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 50h - 5Fh Position of cursor for each video page. Current cursor po- sition is stored two bytes per page. First byte specifies the column, the second byte specifies the row.
  • Page 300 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 78h - 7Bh Default parallel port timeout values 7Dh - 7Fh Default serial port timeout values 80h - 81h Pointer to start of keyboard buffer 82h - 83h...
  • Page 301 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E BIOS Data Area Definitions Continued... Location Description 92h - 93h Scratch area for diskette media. Low byte for drive A, high byte for drive B. 94h - 95h Current track number for both drives. Low byte for drive A, high byte for drive B.

  • Page 302: Compatibility Service Table

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 5.8.1 Compatibility Service Table In order to ensure compatibility with industry-standard memory locations for interrupt service routines and miscellaneous tabular data, the BIOS maintains tables and jump vectors. Location Description FE05Bh Entry Point for POST...

  • Page 303: Vga, Lcd

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 6 VGA, LCD VGA / LCD controller 69000 69000 High Performance Flat Panel / CRT HiQVideo Accelerator with Integrated Memory • Highly integrated Flat Panel and CRT GUI Accelerator & Multimedia Engine, Palette/DAC, Clock Synthe- sizer, and integrated frame buffer •...

  • Page 304: Display Modes Supported

    3.3V but can tolerate 5V operation. Software Compatibility / Flexibility The 69000 is fully compatible with the VGA standard at both the register and BIOS levels. DIGITAL-LOGIC supply a fully VGA compatible BIOS, end-user utilities and drivers for common application programs.

  • Page 305: Vga/Lcd Bios Support

    FOR A NEW LCD TYPE, NOT AVAILABLE NOW: If the LCD BIOS for your LCD is not available, DIGITAL-LOGIC will adapt the LCD and provide you with one working cable. To initialise this, we need the following points from you:...

  • Page 306: Memory 69000 Crt/Tft Panels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 69000 CRT/TFT panels Hor. Vert. Color Refr. DCLK Cursor FB/C FB/M Video Total Total Resol. Resol. kByte kByte kByte kByte Input with kByte Video Video 25.175 31.500 31.500 36.000 25.175 31.500 31.500 36.000 25.175 1204 31.500...

  • Page 307: Memory 69000 Color Stn-Dd Panels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 69000 color STN-DD panels Hor. Vert. Color Refr. DCLK Cursor FB/C FB/M Video Total Total Resol. Resol. kByte kByte kByte kByte Input with kByte Video Video 25.175 31.500 31.500 36.000 25.175 1024 31.500 1024 31.500...

  • Page 308: Memory 69000 Mono Stn-Dd Panels

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Memory 69000 Mono STN-DD panels Hor. Vert. Color Refr. DCLK Cursor FB/C FB/M Video Total Total Resol. Resol. kByte kByte kByte kByte Input with kByte Video Video 25.175 31.500 31.500 36.000 25.175 31.500 31.500 36.000 25.175...

  • Page 309: Description Of The Connectors

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E ESCRIPTION OF THE CONNECTORS Flat cable 44pin IDE is: IDT Terminal for Dual Row (2.00mm grid) and 1.00mm flat cable • All others are: IDT Terminal for Dual Row 0.1" (2.54mm grid) and 1.27mm flat cable •...
  • Page 310 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Serial Port COM1 (from ELAN520) Header onboard: RS232 Signal RS485 Signal * D-SUB connector: Pin 1 = DCD Pin 1 Pin 2 = DSR Pin 6 Pin 3 = RxD Pin 2 Pin 4 = RTS...
  • Page 311 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Floppy Disk Interface- connector (MOLEX 26pin FCC) FD26: Signal Name Function in/out +5 volts Index Pulse +5 volts Drive Select 2 +5 volts DCHG Disk Change Motor On 2 DIRC Direction Select STEP Step Write Data...
  • Page 312 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Printerport (Centronics) The printer connector provides an interface for 8 Bit centronics printers. Header onboard: D-SUB connector: Signal Pin 1 Pin 1 = Strobe Pin 3 Pin 2 = Data 0 Pin 5 Pin 3...
  • Page 313 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E The Utility connector must be wired to a standard AT-female connector: Frontside AT-Keyboard (female) Solderside AT-Keyboard (female) Data (2) Data (2) Ground (4) VCC (5) VCC (5) Ground (4) Clock (1) Clock (1) PS/2 Frontside (female)
  • Page 314 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E LCD connector VGA-LCD Interface (flatpanel signals): Signals P20-P23 are located on the J7M connector Signal Signal M / DE Signal Line Pulse LP VCC-LCD (1A), Selected by J51 VEESAVE (5V/1A) Shift Clock VBACKSAVE (12V/1A) Contrast resistor pin 1 *)
  • Page 315 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E VGA Monitor (CRT-Signals) J7 L/M Header 15 pins HiDensity D-SUB 40 Pin -L 10 Pin -M Signal Signal Pin 32 Pin 2 VGA red Pin 1 Pin 34 Pin 4 VGA green Pin 2 Green...
  • Page 316 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E LAN LED Signal Remarks LILEDX / Link LED 330 Ohm resistor on board VCC3 ACTLEDX / Activity LED 330 Ohm resistor on board JTAG connector (debugging) Signal Signal CMDACK BREAK STOP TRACE TRST RESETIN Spare connector (not assembled), for test purposes only...
  • Page 317 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E PC/104 BUS interface Ground Ground (IOCHCK) NC Ground SBHE MEMCS16 RESET LA23 IOCS16 (+5V) NC LA22 IRQ10 IRQ9 LA21 IRQ11 LA20 IRQ12 DRQ2 LA19 IRQ15 (-12V) NC LA18 IRQ14 (0WS) NC LA17 DACK0 +12V MEMR...
  • Page 318 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Battery connector Signal Pin 1 Battery 3.6V Pin 2 Ground U112 DOC 2000 IC- socket Signal Signal Compact card holder, typ1 Signal Pin 01 = GND Pin 02 = D3 Pin 03 = D4 Pin 04...
  • Page 319 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Signal Pin 28 = D12 Pin 29 = D13 Pin 30 = D14 Pin 31 = D15 Pin 32 = CS1 (active low) Pin 33 = (Vs1) NC Pin 34 = IOR (active low) Pin 35...
  • Page 320 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E SODIMM (Small Outline- Dual Inline Memory Module), 144pins Normal Description Normal Description Ground Ground Not connected Data 0 Ground DQ32 Data 32 Ground Data 1 DQ33 Data 33 Data 2 DQ34 Data 34 Data 3...
  • Page 321 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Normal Description Normal Description +5 VDC +5 VDC DQ28 Data 28 DQ60 Data 60 Don't use DQ29 Data 29 Don't use DQ61 Data 61 +5 VDC DQ30 Data 30 +5 VDC DQ62 Data 62 Don't use...

  • Page 322: Jumper Locations On The Board

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E UMPER LOCATIONS ON THE BOARD Jumper locations on the board The figure shows the location of all jumper blocks on the MSM586SEN/SEV board. The numbers shown in this figure are silk screened on the board so that the pins can easily be located. This chapter refers to the individual pin for these jumpers.

  • Page 323: Jumpers Locations On The Msm586Sen/Sev V2.2/2.3/2.3A/2.4/2.5

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Jumpers locations on the MSM586SEN/SEV V2.2/2.3/2.3a/2.4/2.5 Top side: Remark: The connectors J49/50 of the old Version V2.1. were not at the same position, as above defined. There were closer placed.
  • Page 324 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Bottom side:...
  • Page 325 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 9 LED CRITERIONS Color Function green Primary HDD green LAN linked green LAN active green LAN speed...

  • Page 326: Cable Interface

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E ABLE INTERFACE 10.1 The harddisk cable 44pin IDT Terminal for Dual Row (2.00 mm grid) and 1.00 mm flat cable. 44 pins = 40 pins signal and 4 pins power. Max. length for the IDE cable is 30 cm.

  • Page 327: The Com 1/2/3/4 Serial Interface Cable

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 10.2 The COM 1/2/3/4 serial interface cable DT terminal for dual row 0.1" (2.54 mm grid) and 1.27 mm flat cable. Line of pin 1 COM1 9pin D-Sub male COM1/2 ATTENTION: Do not short-circuit these signal lines.

  • Page 328: The Printer Interface Cable (P1)

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 10.3 The printer interface cable (P1) IDT terminal for dual row 0.1" (2.54mm grid) and 1.27 mm flat cable Parallelport Cable LPT1 ATTENTION: Maximum length of this cable is 6 meters. Prevent short-circuits. Never apply power to these signals, the MICROSPACE MSM586SEV will be destroyed.

  • Page 329: The Micro Floppy Interface Cable

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 10.4 The Micro Floppy interface cable...

  • Page 330: Remote Features

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 11 R EMOTE UNCTION Remote works only with the COM 1 port on the MSM586SEN/SEV. BIOS default settings are normally as follows: Internal ELAN A COM 1 Internal ELAN B NONE SUPER I/O C NONE...

  • Page 331: Remote Enabler

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E When video redirection is enabled (option NOVIDEO not active), the BIOS will skip the initialization of both ISA and PCI VGA cards. The BIOS thereby comes up much quicker. Using the keyword DUALVIDEO will enable possible VGA cards as well and display video output on both the real video card and on the remote machine.

  • Page 332: Restrictions

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Optional: The wiring of the parallel DOS/Link-Cable (DSUB 25pin) is as follows: PC1 (Host) PC2 (Target) Signal Name DSUB-Pin Number DSUB-Pin Number Signal Name ERROR# − − SLCT − − − − ACK# − −...

  • Page 333: 100/10 Ethernet Lan

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 100/10 E THERNET Required programs and drivers are located on our CD in the directory x:\DRIVERS\NETWORK\INTEL\ 13.1 Intel 82559ER Ethernet chip Create a directory C:\network on your harddisk. Copy the programs and drivers of x:\DRIVERS\NETWORK\INTEL\82559ER\ onto your HD.

  • Page 334: Driver Installation Windows 95

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 13.1.2 Driver installation WINDOWS 95 Copy Intel Pro100+ driver on HD (x:\drivers\network\intel\82559ER). De-install all networkdrivers under Windows95 in system and software folders and restart Windows. Networkcard Pro10 PCI will be auto-detected and all drivers can be installed (of the copied directory).

  • Page 335: Intel 82559 Ethernet Chip

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 13.2 Intel 82559 Ethernet chip Create a directory C:\LAN100 on your harddisk. Copy the programs and drivers of x:\DRIVERS\NETWORK\INTEL\82559\ onto your HD. 13.2.1 Installation example for MSDOS Novell 4.11 run “setup.exe” in the directory c:\lan100\...

  • Page 336: Eeprom Update

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 13.2.4 EEPROM update Do not use this function, if the EEPROM is not corrupted ! To download the data into the EEPROM, make the following steps: start MSDOS change into the directory: c:\lan100\utility\e2prom\... type the following string: eeupdate –all lan100.eep lan100.dat...

  • Page 337: Installing The Flashdisk Doc2000

    DOC2000 NSTALLING THE FLASHDISK On the SSD 36pin socket a DiskOnChip DOC2000 module from M-Systems may be installed. This device is also available at DIGITAL-LOGIC AG. Operating Systems: DOS, DL-DOS, RTX-DOS, WIN 3.11, ROM-WIN are working with these drives. All other non DOS compatible systems need a driver.

  • Page 338: The Special Function Interface For Microspace

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E PECIAL ERIPHERALS ONFIGURATION 15.1 The special function interface for MICROSPACE computers SFI All functions are performed by starting the SW-interrupt 15hex with the following arguments: Function: WRITE TO EEPROM Number: Writes the Data byte into the addressed User-Memory-Cell from Description: the serial EEPROM.
  • Page 339 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Function: WRITE PRODUCTION DATE & RESET DLAG-COUNTERS Number: Writes the production date into the addressed DLAG-Memory- Cell from the serial EEPROM. The old value is automatically de- Description: leted. If the Password is also in DX, the counters will be resettet...
  • Page 340 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Function: READ INFO 2 FROM EEPROM Number: Reads the information bytes out of the serial EEPROM Description: DLAG Int15 function Input values: Function request Board Type BOARD TYPE ('M'=PC/104, 'E'=Euro, 'W'=MSWS, Output values: 'S'=Slot, 'C'=Custom, 'X'= smartCore or smartModule CPU Type bits 1…7 and board type bits 8…15 (CPU type:...

  • Page 341: Starting Up The System

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E UILDING A SYSTEM To build up a system based on your board, you should prepare the following equipments: A stable power supply of 5V (> 3 ampères), depending on the cpu, memory, etc. Assemble CPU with the proper clk- settings and cooling (fan) depending on board.

  • Page 342: Diagnostics

    Connect a floppy: does the bezel LED light blink? Does the harddisk spindle motor start? Reset the CMOS-RAM C. If the error appears again Contact your nearest DIGITAL-LOGIC distributor for Technical Support. Or fill out the support request form (SRF) on the Internet: http://www.digitallogic.com / Support...

  • Page 343: Post-Code Description

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 17.2 POST-CODE Description More details are available in the separate BIOS manual on our CD and homepage ! 17.2.1 Boot Loader DIAG_SYSTEM_INIT Boot started DIAG_A20_DISABLE Disable A20 through A20 DIAG_INIT_CHIPSET Initialize CS DIAG_TEST_RAM Test RAM...

  • Page 344: Error Beep Codes

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E DEBUG_RAM_SIZE_DONE RAM test completed DEBUG_RAM_PROT_EXIT Protected mode exit successful DEBUG_CS_SHADOW_SETUP Setup Shadow DEBUG_VIDEO_EQUIP_INIT_INIT Going To Initialize Video DEBUG_VIDEO_BW_SEARCH Search For Monochrome Adapter DEBUG_VIDEO_COLOR_SEARCH Search For Color Adapter DEBUG_VIDEO_SIGNON Signon messages displayed DEBUG_OEM_CONFIG_KBD_CTL special init of keyboard ctlr...

  • Page 345: Assemblings View

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E 18 A SSEMBLINGS VIEW 18.1 MSM586SV/SN – SEV/SEN V2.3a/2.4/2.5...
  • Page 346 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E...

  • Page 347: Index

    DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E INDEX 10/100 BASE-T Interface harddisk cable 100/10 Ethernet LAN harddisk connected application notes I/O map IDE interface Incompatibilities Input Signals interrupt 15H Battery Interrupt Controllers Battery connector BIOS BIOS CMOS BIOS History BIOS manual JTAG...
  • Page 348 DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E Remote Function Thermoscan ROM-BIOS RS-485 RTS Control Utility- connector Utility Connector Schematics Security serial interface cable Serial port VGA BIOS 47, 48 Serial Ports 30, 78 VGA Monitor SODIMM Speaker Special Function Interface Watchdog Specifications...

This manual is also suitable for:

Microspace msm586sev

Table of Contents