Using Automatic Called Number Redial (Acnr) - iPECS LIP-9000 Series User Manual

To enter your station user name:
 Press the TRANSFER(PGM) button.
 Dial 74 the Station Name registration code, for UCP/eMG).
 Enter the Name, up to 20 characters. Refer to the "1.7 Entering Text" to
enter text.
 The name may also be configured under the Phone menu. Refer to
"9.2.1.1 Station Name Program" for details.

4.3.6 Using Automatic Called Number Redial (ACNR)

When making an external call and a busy signal is received, Automatic
Called Number Redial (ACNR) will retry the number until the call is
connected, the feature is cancelled, or the maximum number of retries is
attempted.
For each retry, the system will activate your speaker then place the call with
the microphone muted. When the remote end answers, you must select
the MUTE button, or lift the handset.
Either of these actions cancels the ACNR request as well as connects you
to the remote party.
To set up ACNR, while on an outgoing call:
 Use the Navigation button to display the next Softkey menu and select
the ACNR Softkey, (In case of LIP-9010, use the programmed REDIAL
flexible button instead of the ACNR Softkey.)
 Hang-up the handset.
To cancel the ACNR request:
 Press the ACNR STOP Softkey. If you are using an LIP-9010, use the
programmed REDIAL flexible button to cancel an active ACNR request.
LIP-9000 Series User Guide - ST- Issue 1. 5 33