Wake-Up Alarm; Alarm/Door Bell - iPECS LIP-9000 Series User Manual

8.6 Wake-Up Alarm

iPECS systems include an Alarm clock for each station in the system. You
may have access to one or 5 alarm settings and may set the alarm as a
one-time or repeating alarm. When you set an alarm, you select the
repeating type (1 – 4) as below.
1 - Alarm activates one-time on the assigned date and time.
2 - Alarm repeats daily, Monday through Friday.
3 - Alarm repeats daily, Monday through Saturday.
4 - Alarm repeats daily each day of the week.
To set the Wake Up Alarm clock:
 Press the TRANSFER(PGM) button,
 Dial 41 (Alarm register code for UCP/eMG),
 If requested, enter the Wake-up alarm index number, "1 to 5".
 Dial the desired 2-digit hour (24-hour mode), then the 2-digit minute for
alerting.
 If requested, enter the Repeating type, "1" to "4".
 If requested, enter the date for the alarm as two (2) digits for year,
month and day of the month.
 Press the HOLD(SAVE) button.
To erase a Wake-Up alarm:
 Press the TRANSFER(PGM) button.
 Dial "42".
 If requested, enter Wake-Up alarm index number, "1" to "5".
 Press the HOLD(SAVE) button.
To stop the alarm notification
 Lift the handset or press the SPEAKER button.

8.7 Alarm/Door Bell

The system can monitor up to four external contacts as Alarm or Door Bell
contacts. The number of monitoring circuits varies based on the iPECS
platform and size.
50 LIP-9000 Series User Guide - ST - Issue 1.5