Push-To-Talk (Ptt) Page - iPECS LIP-9000 Series User Manual

using Meet-Me Paging. In this case, the paged party may answer the page
from any phone in the system by dialing the Meet-Me code. After dialing the
Meet-Me code, the party is connected to your phone and the Page Zone
returns to idle.
To make a page:
 Lift the handset,
 Dial the desired Page zone,
 If assigned, after the page warning tone, make your announcement.
To queue for a busy Page Zone:
 Press the MSG button,
 Replace the handset, returning to idle.
To answer a Meet-me-Page:
 Lift the handset.
 Dial Meet-Me-Page code.

8.5 Push-To-Talk (PTT) Page

iPECS Phones can be assigned as a member of one or more of the
system's nine Push-To-Talk (PTT) page groups. You login or log-out of any
one or all PTT groups to which your phone is assigned. Once logged in,
place or receive one-way page announcements to/from other users who are
logged in to the same PTT group.
To log-in to a PTT group:
 Dial #0
 Dial the desired PTT group number (1-9 or 0 for all groups),
To log-out of the PTT group(s):
 Dial #0, the PTT Log-in/out code,
 Press the * dial pad button.
To place a page announcement to the active PTT group:
 Press and hold the PTT flexible button,
 After confirmation tone, make your page announcement.
 When you finish your announcement, release the PTT flexible button.
LIP-9000 Series User Guide - ST- Issue 1. 5 49