AJ-HPX3000 update procedure Oct.2008 AJ-HPX3000 Driver Software (Firmware) update procedure 1. Version Information 1-1 How to check the version of the camera recorder. Each software version can be confirmed at item “DIAGNOSTIC 1” and “DIAGNOSTIC 2” in MAIN menu. Hold down the MENU button for 3 second or more to open the MAIN menu.
Page 2
AJ-HPX3000 update procedure Oct.2008 Update with the SD Card 2-1. Summary 1.Copy the update file of the Driver Software (Firmware) to an SD card. 2.Software can be updated using this SD card. (It is not suppurted MMC Card) CAUTION: Before Update Software ●...
AJ-HPX3000 update procedure Oct.2008 2-3. Updated procedure 1. Turn on power this unit. 2. Press the THUMBNAIL button to display the thumbnail screen. 3. Insert a formatted SD card into the SD card insertion slot of this unit. BUSY (operation mode display)
Page 4
AJ-HPX3000 update procedure Oct.2008 6. Update program is started and the message “PREPARING FOR UPDATE” appears on screen. In this timing, it is doing preparation such as the confirmation of the data of the updating. In this time, BUSY (operation mode is turned off.
Page 5
AJ-HPX3000 update procedure Oct.2008 NOTE: If the upgrade is not successful, an error message will appear as follows. If the power supply is shut down on the way to update or above error operation happens, turn the power OFF/ON then restart the write function start again in a few minutes.