Color Tv Standard Settings (Settings For Frame Frequency) - Panasonic AJ-HPX3100G Operating Instructions Manual

Hide thumbs Also See for AJ-HPX3100G:
Table of Contents

Advertisement

Color TV Standard Settings
(Settings for frame frequency)
The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the
preferred standard, refer to the procedures described below.
After connecting the unit to the power supply
and then turning on the power, press the
MENU SW button while pressing the LIGHT
SW button to open OPTION MENU.
Turn the JOG dial button to move the cursor
(arrow) to the AREA SELECT item, and the
press the JOG dial button. The menu item
AREA SELECT is found in the <AREA
SETTING> screen on the OPTION MENU page.
Select the area among NTSC, NTSC(J), and
PAL. After selecting the area by turning the
JOG dial button, press the JOG dial button.
General: Color TV Standard Settings (Settings for frame frequency)
Move the arrow ( ) to YES and press the JOG
dial button. The settings selected in Step
above are reflected in FACTORY and
CURRENT DATA on the screen.
Turn off the power supply once and then turn
on it again.
The settings are not saved unless SET is executed even if
NTSC, NTSC(J), or PAL is selected in the AREA SELECT.
When these items are set when the unit is used for the first
time, only the following 11 items are revised. When the other
settings of the unit are set in MAIN MENU, the MENU setting
values for items other than the following 8 are ones that were
set at the factory.
Factory
settings
SYSTEM
1080-
1080-
MODE
59.94i
59.94i
AVC-I 100/
AVC-I 100/
REC FORMAT
60i
60i
CAMERA
60i
60i
MODE
*1
7.5%A
7.5%A
SET UP
SET UP (D/C)
7.5%
7.5%
*2
REAR LINE IN
+4dB
+4dB
LVL
AUDIO OUT
+4dB
+4dB
LVL
HEAD ROOM
20dB
20dB
GUI metadata
American
American
language
English
English
indication
Not
Not
LANGUAGE
displayed
displayed
DATE
MDY
MDY
*3
FORMAT
*1 SET UP of the SYSTEM MODE menu
(Enabled only for 480-59.94i)
*2 SET UP of the DOWNCON SETTING menu
(Enabled only for 1080-59.94i)
*3 Select THUMBNAIL
SETUP
thumbnail menu.
[Setting the Thumbnail Display Mode] (page 132).
1080-
1080-50i
59.94i
AVC-I 100/
AVC-I 100/
60i
50i
60i
50i
0%
0%
0%
0%
+4dB
0dB
+4dB
0dB
20dB
18dB
Japanese/
American
For Japan
English
ENGLISH Not
displayed
YMD
DMY
DATE FORMAT from the

Advertisement

Table of Contents
loading

Table of Contents